Interior Seal | Pella 802Q0101 guide

3 INTEGRATING THE WINDOW TO THE WATER RESISTIVE BARRIER

A. Apply side flashing tape. Cut two pieces of flashing tape 4" longer than the frame height of the window. Apply one piece to each side 1/2" onto the frame, over the nailing fin and onto the water resistive barrier. The tape should extend 2" above the top

of the window and 2" below the bottom of the 3A window. Press the tape down firmly while folding

down the excess tape at the top and bottom of the window.

B. Apply top flashing tape. Cut a piece of flashing tape
long enough to go across the top of the window and
extend at least 1" past the side flashing tape on both
sides. Apply the tape 1/2" onto the frame, over the	3B
top nailing fin as shown. Fold the overlapping tape
down, and press all tape down firmly.

Note: DO NOT tape or seal the bottom nailing fin.

C.Fold down top flap of the water resistive barrier.

D.Apply flashing tape to diagonal cuts. Cut pieces of

flashing tape at least 1" longer than the diagonal cuts

in the water resistive barrier. Apply the tape covering 3D the entire diagonal cut in the water resistive barrier

at both upper corners of the window.

Note: Be sure to overlap the top corners.

4 INTERIOR SEAL

Caution: Ensure use of low pressure polyurethane window and door insulating foams and strictly follow the foam manufacturer’s recommendations for application. Use of high pressure foams or improper application of the foam may cause the window frame to bow and hinder operation.

A.Apply insulating foam sealant. From the interior, insert the nozzle of the applicator approximately 1" deep into the space between the window and the rough opening and apply a 1" deep bead of foam. This will allow room for expansion of the foam and will minimize squeeze out. If using foam other than Great Stuff ™ Window and Door Insulation Foam Sealant by the Dow Chemical Company, allow the foam to dry completely (usually 8 to 24 hours) before proceeding to the next step.

Note: DO NOT completely fill the space from the back of the fin to the interior face of the opening.

Interior View

B.Check window operation (vent units only) by opening and closing the window.

Note: If the window does not operate correctly, check to make sure it is still plumb, level, square and that the sides are not bowed. If adjustments are required, remove the foam with a serrated knife. Adjust the shims, and reapply the insulating foam sealant.

802Q0101 specifications

The Pella 802Q0101 is a distinguished window option that exemplifies modern design combined with energy efficiency and durability. Designed for both residential and commercial properties, this window model features a combination of innovative technologies and practical aesthetics.

One of the main features of the Pella 802Q0101 is its exceptional energy efficiency. Equipped with advanced Low-E glass technology, the window minimizes heat transfer, ensuring that homes remain comfortable throughout the changing seasons. The Low-E coating reflects heat back into the living space during winter while keeping excessive heat out during summer. This feature not only promotes a comfortable indoor environment but also contributes to lower energy bills, making it an environmentally friendly choice.

The Pella 802Q0101 boasts a multi-chambered frame design that provides structural integrity while enhancing insulation performance. This frame is constructed from high-quality materials that resist warping, bending, and cracking, ensuring longevity and minimal maintenance over time. The window is also designed to withstand harsh weather conditions, making it an ideal option for homeowners in varying climates.

In terms of aesthetics, the Pella 802Q0101 offers a sleek, contemporary look with customizable options. Homeowners can choose from a variety of finishes, colors, and grille patterns to complement their property’s architecture. The large glass surface area maximizes natural light and provides unobstructed views, making any space feel larger and more inviting.

The Pella 802Q0101 also integrates advanced locking mechanisms that provide enhanced security without compromising ease of use. The locking system is designed to offer peace of mind for homeowners while maintaining a simple operation.

In addition to its functional benefits, the Pella 802Q0101 is manufactured with sustainability in mind. Pella is committed to environmentally responsible practices, and this model is crafted with recyclable materials, appealing to eco-conscious consumers.

In summary, the Pella 802Q0101 is a well-rounded window option that offers a combination of energy efficiency, durability, aesthetic appeal, and security. Its advanced features make it an intelligent choice for those looking to improve their home's comfort, beauty, and value. Whether upgrading existing windows or building new, the Pella 802Q0101 stands out as a prime selection for modern living.