Integrating the Door to the Building Felt

3INTEGRATING THE DOOR TO THE BUILDING FELT

Note: The ﬂashing tape must be applied approximately 1/2" onto the frame cladding at the jambs and head. Pre-folding the tape at 1/2" before removing the paper backing will make it easier to apply the tape correctly. If the siding is less than 1/2" thick, adjust the dimension of the fold so the exterior sealant line will cover the exterior edge of the tape.

A.Apply side ﬂashing tape. #UT PIECESPOF mASHING

TAPE ELONGER THANOTHEGFRAME HEIGHT OF THEHDOOR !PPLY ONE PIECE PUP ONTOETHEFRAMECLADDINGO OVER THE NAILING lNAANDLONTO THE mASHING PAPER TON EACH SIDE 4HEHTAPE SHOULDEEXTEND UABOVEETHETTOPE OF THE DOOREANDD BELOWWTHETBOTTOM OFOTHETDOOR 0RESSSTHE TAPE DOWN lRMLY WHILE FOLDING DOWN THE EXCESS TAPE AT THE TOP AND BOTTOMEOF THE DOOR

&YUFSJPS

B.Apply top ﬂashing tape. Cut a piece of ﬂashing tape long enough to go across

THEHTOP OF THE DOORFANDTEXTEND ATOLEAST PAST THEXSIDE mASHINGGTAPE ONPBOTH SIDESB !PPLY THE TAPEH UPAONTO THE FRAME CLADDING OVER THE TOP NAILINGIlN AS SHOWNN &OLDLTHE OVERLAPPINGPTAPE DOWNNAND PRESSSALL TAPE DOWN lRMLY

Note: The top ﬂashing tape must overlap the side ﬂashing tape to prevent water from getting behind it.

C. Apply the top ﬂashing paper. #UT ONE PIECE OFPmASHINGEPAPERFAT LEAST LONGERPTHAN THE width of the rough opening. Position the bottom edge of the ﬂashing paper ﬂush with the

frame of the door and center the ﬂashing paper with the door. Staple the ﬂashing paper toÎ the header.

Note: When applying the ﬁrst layer of building felt, ensure the sill ﬂashing paper overlaps the building felt. This will tie the door system into the building water management system.

4INTERIOR SEAL

Caution: Ensure use of low pressure polyurethane window and door installation foams and strictly follow the foam manufacturer’s recommendations for application. Use of high pressure foams or improper application of the foam may cause the door to bow and hinder operation. DO NOT use ﬁberglass insulation.

A.Apply insulating foam. &ROM THE INTERIORINSERTTTHETNOZZLE OFOTHEZAPPLICATOR APPROXIMATELYE DEEPDINTO THE SPACE BETWEENETHE DOOR AND THE ROUGH OPENING AND APPLY A LDEEP BEAD OF FOAM 4HIS WILL ALLOWWROOMOFOR EXPANSIONEOF THE FOAMIANDNWILLLMINIMIZEESQUEEZEEOUT )FF USINGIFOAM OTHER THAN 'REATA3TUFF 7INDOWWANDA$OORO)NSULATINGA&OAMA3EALANT BYYTHET $OWW#HEMICAL #OMPANYALLOWWTHETFOAM TOFCUREECOMPLETELY USUALLYY TO THOURS BEFOREE PROCEEDING TOITHEGNEXT STEP

Note: DO NOT completely ﬁll the space from the back of the ﬁn to the interior face of the opening.

*OUFSJPS

{

B. Check the door operation by opening and closing the door.

Note: If the door does not operate correctly, check to make sure it is still plumb, level, square and that the sides are not bowed. If adjustments are required, remove the foam with a serrated knife. Adjust the shims, and reapply the insulating foam sealant.

80KM0103 specifications

The Pella 80KM0103 is a versatile and efficient window solution that exemplifies Pella's commitment to quality and innovation in the window and door industry. Designed with both aesthetics and performance in mind, this model is particularly suitable for homeowners looking to enhance the energy efficiency and visual appeal of their living spaces.

One of the standout features of the Pella 80KM0103 is its advanced energy efficiency technologies. The window utilizes double or triple-pane glass, effectively reducing heat transfer and minimizing energy costs. The insulated glass unit is filled with argon gas, which provides additional thermal protection and contributes to a comfortable indoor environment, regardless of external weather conditions. This energy-efficient design not only lowers heating and cooling bills but also enhances the overall comfort of a home year-round.

In terms of durability, the Pella 80KM0103 is constructed with high-quality materials that resist warping, rotting, and other common issues faced by traditional windows. Its exterior features a fiberglass frame that offers superior strength and protection against the elements, ensuring longevity and reliability. The composite material is designed to withstand extreme weather conditions without requiring extensive maintenance, making it an ideal choice for various environments.

The window is also designed with a focus on noise reduction. The multi-layer glass construction helps to minimize outside noise, creating a quieter and more serene indoor atmosphere. This feature is particularly appealing for homes located in busy urban areas or those situated near highways.

Another significant characteristic of the Pella 80KM0103 is its customizable design. Homeowners can choose from a variety of styles, colors, and finishes to perfectly match their home’s architecture and personal preferences. This flexibility allows for seamless integration into any design scheme, enhancing the overall aesthetic of the property.

Moreover, the Pella 80KM0103 includes an array of hardware options and locking mechanisms, promoting enhanced security. The incorporation of advanced locking systems ensures that the windows are not only visually appealing but also provide peace of mind for residents.

In summary, the Pella 80KM0103 stands out as an excellent choice for anyone seeking high-performance, energy-efficient, and customizable windows. Its exceptional features, including energy efficiency, noise reduction, durability, and design flexibility, make it a popular option among homeowners looking to upgrade their living spaces while ensuring comfort and security.