STEP-BY-STEP Chimney Connector Installation

INSTALLATION

STEP-BY-STEP

CHIMNEY AND

CONNECTOR

INSTALLATION

Note: These are a generic set of chimney in- stallation instructions. Always follow the manufacturers own instructions explicitly (check the Minimum Rec- ommended Flue Heights section).

1)With your location already established, cut and frame the roof hole. It is recommended that no ceiling support member be cut for chimney and support box installation. If it is necessary to cut them, the members must be made structurally sound.

2)Install radiant shield and support from above.

3)Stack the insulated pipe onto your ﬁ nish support to a minimum height of 3 feet above the roof penetration, or 2 feet above any point within 10 feet measured horizontally. There must be at least 3 feet of chimney above the roof level.

Note: Increasing the chimney height above this minimum level will sometimes help your unit to “breathe” better by allowing a greater draft to be cre- ated. This greater draft can decrease problems such as, difﬁcult start-ups, back-smoking when door is open, and dirty glass. It might be sufﬁcient to initially try with the minimum re- quired height, and then if problems do arise add additional height at a later date.

4)Slide the roof ﬂ ashing over your chimney and seal the ﬂ ashing to the roof with rooﬁ ng compound. Secure the ﬂ ashing to your roof with nails or screws.

5)Place the storm collar over the ﬂ ashing, sealing the joints with a silicone caulking.

6)Fasten the raincap with spark screens (if required) to the top of your chimney.

7)For optimum efﬁ ciency when installing into a masonry chimney, size accordingly, i.e. the 6" (152mm) ﬂ ue dia. is 28.28 sq.in.

8)To complete your chimney installation, install the double wall connector pipe from the stove’s ﬂ ue collar to the chimney support device.

9)If you are using a horizontal connector, the chimney connector should be as high as possible while still maintaining the 18" (457mm) minimum distance from the hori- zontal connector to the ceiling.

10)NOTE: Residential Close Clearance and Alcove installations require a listed dou- ble wall connector from the stove collar to the ceiling level.

The diagrams below illustrate one way to in- stall your unit into a standard ceiling or with a horizontal connector. Check with your dealer or installer for information on other options available to you.

Standard Ceiling Installation

Horizontal Installation

FACTORY

BUILT CHIMNEY

When a metal prefabricated chimney is used, the manufacturer's installation instructions must be followed. You must also purchase and install the ceiling support package or wall pass-through and "T" section package, ﬁrestops (where needed), insulation shield, roof ﬂashing, chimney cap, etc. Maintain proper clearance to the structure as recommended by the manufac- turer. The chimney must be the required height above the roof or other obstructions for safety and proper draft operation.

Hampton H200 Cast Freestanding Woodstove

H200 specifications

The Hampton Direct H200 is an innovative solution for consumers seeking convenience and efficiency in their daily tasks. This versatile device stands out in the market due to its combination of smart technology and user-friendly features, making it an essential addition to any household.

One of the key features of the H200 is its sleek and modern design, which ensures that it fits seamlessly into any home environment. Its compact size allows for easy storage and portability, making it accessible for various needs, whether at home or on the go.

The H200 boasts advanced functionality powered by cutting-edge technology. One notable aspect is its intuitive control panel, which incorporates touch-screen functionality for effortless navigation. Users can easily select different modes and settings tailored to their specific requirements, enhancing usability and flexibility.

In terms of performance, the H200 utilizes energy-efficient technology that not only reduces power consumption but also promotes sustainability. This is a significant advantage for environmentally-conscious users looking to minimize their carbon footprint while still enjoying modern conveniences.

The device is equipped with multiple settings that cater to different tasks. Whether it’s cooking, cleaning, or organizing, the H200 adapts to various functions with ease. Its powerful motor ensures efficient operation, allowing users to complete tasks quickly and effectively, saving time and effort in the process.

Additionally, the Hampton Direct H200 emphasizes safety with features such as automatic shut-off and thermal protection, ensuring that users can work confidently without the fear of overheating or accidents.

The ease of maintenance and cleaning further enhances its value. With removable parts that are dishwasher-safe, the H200 offers a hassle-free experience for users, promoting a clean and hygienic environment.

In summary, the Hampton Direct H200 represents a perfect blend of style, performance, and safety. With its array of advanced features and technologies, it stands out as a reliable tool for simplifying daily tasks. Whether used for cooking, organizing, or cleaning, the H200 is designed to meet the demands of modern living, making it a valuable investment for any household looking to enhance productivity and efficiency.