Maintenance

It is very important to carefully maintain your stove, including burning seasoned wood and maintaining a clean stove and chimney system. Have the chimney cleaned before the burning season and as necessary during the season, as creosote deposits may build up rapidly. Moving parts of your stove require no lubrication.

GLASS INSTALLATION/

REPLACEMENT

1)Remove door from unit.

2)To replace the glass remove the 12 screws highlighted in the diagram below.

3)Lift off the glass retainer and carefully re- move glass.

4)Place new glass in the door, make sure that the glass gasketing will properly seal your unit.

5)Position the glass retainer back on. En- sure that it rests on the gasket and not the glass.

6)Secure glass retainer using the 12 screws. Do not wrench down on the glass as this may cause the glass to break.

7)Place door back on unit.

Remove 12 screws.

GLASS MAINTENANCE

Your Hampton stove is supplied with 5 mm Neoceram ceramic glass (Part #940-345) that will withstand the highest heat that your unit will produce. In the event that you break your glass by impact, purchase your replacement from an authorized Hampton dealer only, and follow our step-by-step Glass Installation/Replacement instructions (refer to previous section).

It will be necessary to clean carbon and ﬂ y ash off of the glass at times. If carbon and ﬂ y ash remain on the glass for an extended period of time, the glass could eventually become etched and cloudy.

1)Allow the stove to cool down completely before cleaning the glass, do not clean the glass when it is hot.

2)Use cleaners speciﬁ cally designed for this glass cleaning. Do not use abrasive clean- ers.

3)Ensure the glass is dry before burning your stove.

CREOSOTE

When wood is burned slowly, it produces tar and other organic vapours, which when combined with moisture, form creosote. The creosote va- pours condense in the relatively cool chimney

ﬂue of a slow burning ﬁ re. As a result, creosote residue accumulates on the ﬂ ue lining. When ignited, this creosote can result in an extremely hot ﬁ re.

Ways to Prevent and Keep Unit

Free of Creosote

1)Burn stove with the draft control wide open for about 10-15 minutes every morning during burning season.

2)Burn stove with draft control wide open for about 10 - 15 minutes every time you apply fresh wood. This allows the wood to achieve the charcoal stage faster and burns up any unburned gas vapours which might otherwise be deposited within the system.

3)Only burn seasoned wood! Avoid burning wet or green wood. Seasoned wood has been dried at least one year.

4)A small hot ﬁ re is preferable to a large smouldering one that can deposit creosote within the system.

5)The chimney and chimney connector should be inspected at least once every two months during the heating season to determine if a creosote buildup has occurred.

6)Have chimney system and unit cleaned by competent chimney sweeps twice a year during the ﬁrst year of use and at least once a year thereafter or when a signiﬁcant layer of creosote has accu- mulated (3mm/1/8" or more) it should be removed to reduce the risk of a chimney ﬁre.

WOOD STORAGE

Store wood under cover, such as in a shed, or covered with a tarp, plastic, tar paper, sheets of scrap plywood, etc., as uncovered wood can absorb water from rain or snow, delaying the seasoning process.

WARNING: Things to remember in case of a chimney ﬁre:

1.Close all draft and damper controls.

2.CALL THE FIRE DEPARTMENT.

Glass Retainer

24	Hampton H200 Cast Freestanding Woodstove

H200 specifications

The Hampton Direct H200 is an innovative solution for consumers seeking convenience and efficiency in their daily tasks. This versatile device stands out in the market due to its combination of smart technology and user-friendly features, making it an essential addition to any household.

One of the key features of the H200 is its sleek and modern design, which ensures that it fits seamlessly into any home environment. Its compact size allows for easy storage and portability, making it accessible for various needs, whether at home or on the go.

The H200 boasts advanced functionality powered by cutting-edge technology. One notable aspect is its intuitive control panel, which incorporates touch-screen functionality for effortless navigation. Users can easily select different modes and settings tailored to their specific requirements, enhancing usability and flexibility.

In terms of performance, the H200 utilizes energy-efficient technology that not only reduces power consumption but also promotes sustainability. This is a significant advantage for environmentally-conscious users looking to minimize their carbon footprint while still enjoying modern conveniences.

The device is equipped with multiple settings that cater to different tasks. Whether it’s cooking, cleaning, or organizing, the H200 adapts to various functions with ease. Its powerful motor ensures efficient operation, allowing users to complete tasks quickly and effectively, saving time and effort in the process.

Additionally, the Hampton Direct H200 emphasizes safety with features such as automatic shut-off and thermal protection, ensuring that users can work confidently without the fear of overheating or accidents.

The ease of maintenance and cleaning further enhances its value. With removable parts that are dishwasher-safe, the H200 offers a hassle-free experience for users, promoting a clean and hygienic environment.

In summary, the Hampton Direct H200 represents a perfect blend of style, performance, and safety. With its array of advanced features and technologies, it stands out as a reliable tool for simplifying daily tasks. Whether used for cooking, organizing, or cleaning, the H200 is designed to meet the demands of modern living, making it a valuable investment for any household looking to enhance productivity and efficiency.