Drolet ECO-65 Installation, Back wall installation Corner installation Floor protection, Features

Page 7

1. INSTALLATION

1.1.FEATURES

DROLET ECO-65 FREESTANDING PELLET STOVE

Width: 24”

Height: 41”

Depth: 30”

Weight: 375 lbs.

Flue size: 4”

Hopper Capacity: Up to 125 lbs. (This can vary depending on pellet size, length, and diameter)

EPA status: < 4.5 g/h.

Burn rate: 1.3 lbs to 7.9 lbs. per hour

BTU range: 10,500 to 65,000

Electrical consumption:

o5 Amps lighting cycle

o2.5 Amps. continuous duty

Control board fuses: Main: 7.5A-250V fastblow

oConvection blower: 5A-250V fastblow o Combustion blower: 3A-250V fastblow o Exhaust blower: 3A-250V fastblow

o Auger 1: 3A-250V fastblow

o Auger 2: 3A-250V fastblow

o Ignitor : 5A-250V fastblow

Electrical requirement: 120VAC 15A

Approved installations: mobile home, conventional

1.2.PREPARATION

Factory packaging must be removed, and some minor assembly work is required prior to installation for handle and door adjustment. Also, the stove must be leveled using threaded legs.

1.3.CLEARANCES

The Drolet ECO-65 has been tested and listed for installation in residential and mobile home. (refer to figure 1 & 2)

FLOOR PROTECTION: minimum of 6” in the front and 6” on each side of the door opening. The stove must be placed on a continuous (grouted joints) noncombustible material such as ceramic tile, cement board, brick, 3/8” millboard or equivalent, or other approved or listed material suited for floor protection.

NOTE: ceramic tile, or any tile, requires a continuous sheet beneath to prevent the possibility of embers falling through to the combustible floor if cracks or separation should occur in the finished surface, this would include floor protection for Built-in raised hearths. Check local codes for approved alternatives.

Clearances are measured from the sides, back or face (door opening) (refer to fig. 3). For ceiling clearance refer to figure 4.

Clearances may only be reduced by means approved by the regulatory authority.

FIGURE 1

Back wall installation

FIGURE 2

Corner installation

FIGURE 3

Floor protection

Image 7
Contents Stove Builder International Inc Canada25/10/2010 Introduction Safety Precautions Register Your Warranty Online Table of Contents Page Preparation InstallationBack wall installation Corner installation Floor protection FeaturesSources of Outside Combustion Air For mobile home installations onlyCeling clearance Rear view Combustion AIR SupplyFresh air intake damper Fresh air supply Anchor the Stove AnchorVenting Horizontally Through Wall Refer to figures 10,11, or Installation ConfigurationsVenting through wall Equivalent Vent Length EVLVenting through wall Consult the Vent MANUFACTURER’S Instructions Venting through wall Basement installationVertically with NEW Chimney System Refer to Figure Vertically Into Existing Chimney System Refer to Figure Venting through existing chimneyVertically Into Existing Masonry Fireplace Installation Through Side of Masonry ChimneyVenting through side Masonry chimney PRE-START-UP Check Where to Store Bags of PelletsOperation Proper FuelMode Switch Lighting ProcedureFuel Feed Switch Convection Blower Room AIR FAN Opening DoorIf the Stove Runs OUT of Pellets Refueling Shutdown ProcedureSafety Features Operating the Stove Using a ThermostatThermostat location Thermostatic modeFreshen UP a Fire in this Heater Operating Safety PrecautionsPage Cleaning the Burn POT MaintenanceMaintenance of the Exchangers and Blower Housing Dealing with a Chimney Fire Venting System MaintenanceASH Disposal ASH Removal and Vacuum USEDoor Gasket Maintenance Door AdjustmentGlass Care Removal and Replacement of Broken Door GlassGaskets Inspect Hopper Empty / Vacuum Recommended Maintenance ScheduleStove Shuts OFF Appears on Control Board Troubleshooting GuideStove Shuts OFF and Displays Warning Code Stove Stops Feeding Pellets Appears on the Control Board Smoke Smell Coming Back Into the Home Possibles Cause Possible Remedy Message Corresponding Warning Alarm Codes ChartElectrical Diagram Fuse Access Replacement Parts Appendix a Appendix B Description Warranty Application Parts Labour Drolet Limited Lifetime Warranty

ECO-65 specifications

The Drolet ECO-65 is a highly efficient wood stove designed to deliver exceptional heating performance while adhering to strict environmental standards. Known for its robust construction and innovative technology, the ECO-65 represents a significant advancement in clean-burning wood heating solutions.

One of the standout features of the Drolet ECO-65 is its impressive heating capacity. This stove can produce up to 65,000 BTUs, making it suitable for heating spaces up to 2,000 square feet. With this level of output, the ECO-65 is ideal for both residential and larger commercial applications, offering a reliable and economical alternative to traditional heating methods.

The ECO-65 incorporates advanced secondary combustion technology, which maximizes efficiency and minimizes emissions. This system works by igniting the gases produced during wood combustion, allowing for a more complete burn. As a result, less particulate matter is released into the atmosphere, making it an environmentally friendly option. This adherence to eco-friendly practices is further emphasized by the stove’s EPA certification, reflecting its compliance with rigorous air quality standards.

Another notable characteristic of the ECO-65 is its high-efficiency rating, boasting an efficiency level of approximately 78%. This means that a larger portion of the energy contained in the wood is converted into usable heat, reducing fuel consumption and the frequency of refueling. This efficiency is beneficial not only for the environment but also for homeowners looking to decrease heating costs.

In construction, the ECO-65 is built with high-quality materials, featuring a heavy-duty cast iron door and a durable steel body. These materials not only contribute to a longer lifespan but also enhance the stove's ability to retain and radiate heat. The large viewing window provides an inviting ambiance, allowing users to enjoy the beautiful flames while also benefiting from the warmth produced.

The stove also includes a convenient ash pan, making it easier to maintain and clean, ensuring that users can spend less time on upkeep and more time enjoying the comfort it provides. With a simple, intuitive design and adjustable air controls, the Drolet ECO-65 allows homeowners to effortlessly manage their heating needs.

In summary, the Drolet ECO-65 is a premier choice for those seeking an efficient and environmentally responsible wood stove. Its powerful heating capability, advanced combustion technology, and robust build quality make it one of the top contenders in the wood stove market today.