Drolet ECO-65 owner manual Celing clearance Rear view, Combustion AIR Supply

Page 8

CAUTION: DO NOT USE MAKESHIFT MATERIALS OR COMPROMISES IN THE INSTALLATION OF THIS UNIT.

CAUTION: INSTALL VENT WITH CLEARANCES SPECIFIED BY THE VENT MANUFACTURER.

This heating unit must serve as a supplementary heat source. An alternative heat source should be available in the home if needed. The manufacturer cannot be responsible for additional heating costs associated with the use of an alternative heat source.

It is highly recommended that the user buys this product from a retailer who can provide installation and maintenance advices.

1.4.COMBUSTION AIR SUPPLY

THE STOVE MUST BE CONNECTED TO AN OUTSIDE SOURCE OF COMBUSTION AIR.

A 4” inside diameter metallic pipe, either flexible or rigid, must be attached to the inlet at the stove‟s rear (refer to figures 5, 6 & 7). A rodent guard (minimum ¼” wire mesh) must be used at the terminus (refer to figure 6). All connections must be secured and airtight by either using the appropriately sized hose clamp and/or UL-181-AP foil tape. Also make sure that the fresh air damper is open while the stove is running. The fresh air intake damper is located at the back of the stove right hand side (refer to figure 6.).

For mobile home installations only:

No combustion air supply may exceed 10 feet.

Sources of Outside Combustion Air:

A hole in floor near the back of the leading onto a ventilated crawl space under the house.

A hole in the wall behind the stove.

FIGURE 4

Celing clearance

FIGURE 5

Rear view

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 25/10/2010 CanadaStove Builder International Inc Introduction Safety Precautions Register Your Warranty Online Table of Contents Page Installation Back wall installation Corner installation Floor protectionFeatures PreparationFor mobile home installations only Celing clearance Rear viewCombustion AIR Supply Sources of Outside Combustion AirFresh air intake damper Fresh air supply Venting AnchorAnchor the Stove Installation Configurations Venting through wallEquivalent Vent Length EVL Horizontally Through Wall Refer to figures 10,11, orVenting through wall Vertically with NEW Chimney System Refer to Figure Venting through wall Basement installationConsult the Vent MANUFACTURER’S Instructions Venting through existing chimney Vertically Into Existing Chimney System Refer to FigureInstallation Through Side of Masonry Chimney Vertically Into Existing Masonry FireplaceVenting through side Masonry chimney Where to Store Bags of Pellets OperationProper Fuel PRE-START-UP CheckFuel Feed Switch Lighting ProcedureMode Switch If the Stove Runs OUT of Pellets Opening DoorConvection Blower Room AIR FAN Shutdown Procedure Safety FeaturesOperating the Stove Using a Thermostat RefuelingThermostatic mode Thermostat locationOperating Safety Precautions Freshen UP a Fire in this HeaterPage Maintenance of the Exchangers and Blower Housing MaintenanceCleaning the Burn POT Venting System Maintenance Dealing with a Chimney FireASH Removal and Vacuum USE ASH DisposalDoor Adjustment Door Gasket MaintenanceRemoval and Replacement of Broken Door Glass Glass CareRecommended Maintenance Schedule Gaskets Inspect Hopper Empty / VacuumTroubleshooting Guide Stove Shuts OFF Appears on Control BoardStove Shuts OFF and Displays Warning Code Stove Stops Feeding Pellets Appears on the Control Board Smoke Smell Coming Back Into the Home Possibles Cause Possible Remedy Alarm Codes Chart Message Corresponding WarningElectrical Diagram Fuse Access Replacement Parts Appendix a Appendix B Drolet Limited Lifetime Warranty Description Warranty Application Parts Labour

ECO-65 specifications

The Drolet ECO-65 is a highly efficient wood stove designed to deliver exceptional heating performance while adhering to strict environmental standards. Known for its robust construction and innovative technology, the ECO-65 represents a significant advancement in clean-burning wood heating solutions.

One of the standout features of the Drolet ECO-65 is its impressive heating capacity. This stove can produce up to 65,000 BTUs, making it suitable for heating spaces up to 2,000 square feet. With this level of output, the ECO-65 is ideal for both residential and larger commercial applications, offering a reliable and economical alternative to traditional heating methods.

The ECO-65 incorporates advanced secondary combustion technology, which maximizes efficiency and minimizes emissions. This system works by igniting the gases produced during wood combustion, allowing for a more complete burn. As a result, less particulate matter is released into the atmosphere, making it an environmentally friendly option. This adherence to eco-friendly practices is further emphasized by the stove’s EPA certification, reflecting its compliance with rigorous air quality standards.

Another notable characteristic of the ECO-65 is its high-efficiency rating, boasting an efficiency level of approximately 78%. This means that a larger portion of the energy contained in the wood is converted into usable heat, reducing fuel consumption and the frequency of refueling. This efficiency is beneficial not only for the environment but also for homeowners looking to decrease heating costs.

In construction, the ECO-65 is built with high-quality materials, featuring a heavy-duty cast iron door and a durable steel body. These materials not only contribute to a longer lifespan but also enhance the stove's ability to retain and radiate heat. The large viewing window provides an inviting ambiance, allowing users to enjoy the beautiful flames while also benefiting from the warmth produced.

The stove also includes a convenient ash pan, making it easier to maintain and clean, ensuring that users can spend less time on upkeep and more time enjoying the comfort it provides. With a simple, intuitive design and adjustable air controls, the Drolet ECO-65 allows homeowners to effortlessly manage their heating needs.

In summary, the Drolet ECO-65 is a premier choice for those seeking an efficient and environmentally responsible wood stove. Its powerful heating capability, advanced combustion technology, and robust build quality make it one of the top contenders in the wood stove market today.
Top Page Image Contents