Drolet NG1800 owner manual Assembly, Baltic

Page 5

ASSEMBLY

BALTIC

Pedestal Base Installation:

1. Slide the front part of the pedestal base around the pedestal and fix the rear part with the two supplied screws.

2. Slide the ash pan in position.

Side Panels and Ash Lip Installation:

1. Start by fixing the front part of the decorative side in the two clips welded on the sides of the fire box.

2. Then, fix the back of the decorative side with two screws and washers supplied. Line up the decorative side parallel to the side of the appliance.

4

Image 5

Contents Read and Keep this Manual for Reference Drolet NG1800 WoodstovesTable of Contents Introduction Dimensions Overall Technical SpecificationsBaltic AssemblyAUSTRAL, AZIMUTH, Legend and Myriad Door Adjustment Door AdjustmentPositioning the Stove InstallationFloor Protector Single pipe / Double pipe Clearances from CombustiblesType of Protection Reduced Clearances Canada onlyChimney Chimney Connector Stove Pipe Factory Built Chimney Typical InstallationsClay liner Thimble Clean out Door Factory Built Thimble Brick Thimble Outside Combustion AIR Average Energy Yield Of One Air Dried Cord Of Cut Wood Woodstove UtilisationIgnition Testing Your WoodFirst Fires Heating Creosote Formation and Need for Removal ReloadingASH Disposal Glass MaintenanceGasketing PaintDescription Limited Lifetime Warranty