Section II Floor & Wall Protection | England's Stove Works 50-TRW15

SECTION II: FLOOR & WALL PROTECTION

A.Floor Protection

If your floor is constructed of a noncombustible material such as brick or concrete, no floor protection is required. If your floor is constructed of a combustible material such as hardwood, carpet or linoleum, you must place floor protection between the unit and the combustible material.

There are many stove floor and wallboards on the market. You must be very cautious in choosing the proper protection. The board must be U.L. listed. After examining the area in which you plan to place your new unit and determining it requires protection, the next step is to select the proper size board. The unit you choose will determine the size board that is required. The approved board should be large enough to provide a minimum of eight inches (8”) behind the unit, eight inches (8”) on each side of the unit and sixteen inches (16”) in the front of it. This stove requires a minimum 36” x 48” floor protector.

B.Wall Protection

Your stove can be placed within thirty inches (30”) of a combustible wall such as paneling, wallpaper or drywall. In some areas local code may call for thirty-six inches (36”) clearance from a combustible, therefore you should check to see which applies to your area. If you need to place your unit closer it will require wall protection. There are many wall board manufacturers, and most require a one inch (1”) air space between the wall and the board. You can place your unit within twelve inches (12”) of some boards and reduce your clearance by two-thirds. In addition, the wallboard only needs to be six inches (6”) higher than the top of the stove; by placing the unit twelve inches (12”) from a combustible, the flue pipe will be closer than eighteen inches (18”) from a combustible surface. This will require you to use double wall or shielded pipe that allows you to come within six inches (6”) of a combustible surface. Regardless of clearances, we recommend using some type wall protection when installing this unit in a mobile home or double wide. Always follow the pipe and board manufacturer’s directions, and contact us if you have any questions.

C.Heat Shield

This stove has a standard heat shield that allows six inches (6”) clearance from combustibles across the entire rear of the stove. You will still need thirty inches (30”) clearance from combustibles on each side of the stove.

18-MH, 50-SHW15, 50-TRW15 specifications

England's Stove Works is renowned for its innovative and efficient home heating solutions, and their 18-MH, 50-SHW15, and 50-TRW15 models showcase the brand's commitment to quality and performance. These stoves are designed to provide reliable heating while being environmentally conscious and user-friendly.

The England's Stove Works 18-MH is a multifunctional heating appliance that can burn both wood and biomass. It features a sturdy construction, made from high-quality steel, which enhances durability and efficiency. One of its standout features is the patented automatic air control system, allowing for an optimal burn with minimal emissions. The 18-MH is capable of producing an impressive heat output, making it suitable for larger spaces or homes. The large firebox allows for extended burn times, reducing the need for frequent reloads, ensuring you stay warm longer.

On the other hand, the 50-SHW15 model specializes in burning wood and boasts a fully catalytic design, which helps to lower emissions and improve efficiency. This model includes a large ash pan for easy cleanup and a glass door that allows users to enjoy the beauty of the flames. Its compact size does not compromise its heat output, as it can rapidly warm up an area of considerable size, making it ideal for living rooms or open spaces. The 50-SHW15 also features a secondary combustion system that maximizes heat output and minimizes smoke emissions, making it an environmentally friendly option.

The 50-TRW15 model takes a different approach by focusing on pellet fuel. This stove incorporates advanced technology that ensures a consistent burn rate and high energy efficiency. The automatic ignition system allows for easy startup, while the digital control panel gives users complete control over heat output. This model is designed to be user-friendly, allowing non-technical individuals to operate it comfortably. It also features a large pellet hopper, enabling longer burn times without frequent refueling.

All three models are designed with safety in mind, incorporating features such as cool-to-the-touch handles, protective screens, and robust construction to withstand high temperatures. With their combination of efficiency, safety, and ease of use, England's Stove Works 18-MH, 50-SHW15, and 50-TRW15 models exemplify the perfect balance of traditional craftsmanship and modern technology, making them an attractive choice for anyone looking to enhance their home heating options. Whether you prefer wood, biomass, or pellets, these stoves provide a reliable and environmentally-friendly solution for comfortable heating throughout the winter months.