England's Stove Works 17VL, 50SVL17, 50TVL17 manual Installation

Page 11

INSTALLATION

Approved Venting Method 1: Through the Wall Factory Built Chimney

10 ft.

2.0 ft.

Storm Collar

Roof Flashing

18.0 in.

Wall Thimble

Chimney Connector

(Single or Double Wall)

3.0 ft.

Termination Cap

The 10‐3‐2 Rule: The chimney system must terminate 3.0 ft. above the point where its centerline passes through the roof AND the chimney must terminate

2.0ft. above any part of the dwelling within a 10 ft. radius of the chimney.

Class A Chimney System

Tee and Tee Support

Prefabricated chimney systems must conform to UL‐103HT (2100 °F) for the U.S. and ULC‐S629 (650°C) for Canada.

This wood burning unit is only listed for installation with 6.0” diameter chimney connector and chimney systems. Installing this unit on prefabricated chimneys larger than 6.0” diameter will result in decreased draft and the potential for poor unit performance.

Follow all venting system manufacturer’s installation requirements and required clearances.

Use three sheet metal screws at each single wall chimney connector joint (check manufacturer’s recommendations when double wall chimney connector is used).

Drill three holes in the flue collar of the unit and attach the chimney connector to the unit using sheet metal screws.

Properly attach the prefabricated chimney system to the home in strict accordance with the prefabricated chimney system manufacturer’s instructions.

Avoid numerous elbows and excessive horizontal runs as both will lead to poor draft and increased creosote accumulation. Horizontal runs of chimney connector must never exceed 4.0 ft. and the overall length of the chimney connector must not exceed 8.0 ft.

Special adapters and slip connectors are available to eliminate the need to cut single wall chimney connector. Double wall chimney connector must be used with these slip connectors, as it cannot be trimmed to length.

Please Note:

Installation diagrams are for reference purposes only and are not drawn to scale, nor meant to be used as plans for each individual installation. Please follow all venting system requirements, maintain the required clearances to combustibles, and follow all local codes.

Page 11

Image 11
Contents Tranquility Wood Stove Retain for your files Table of Contents Introduction Heating Specifications SpecificationsInstallation Clearances to Combustibles Installation Flue Gas Direction Wall Pass‐Throughs Installation Approved Venting Method 2 Through the Ceiling 10 ft Ft .0 ft 18.0 Installation Floor Protection Value Calculation Operation Creosote Formation and Need for Removal Operation Maintenance Maintenance Replacing Components Issue Cause Solutions TroubleshootingReplacement Parts List Illustrated Parts Diagram Page Limited Five 5 Year Warranty Warranty is not transferable Warranty Registration for England’s Stove Works Important Notice

50SVL17, 17VL, 50TVL17 specifications

England's Stove Works is renowned for manufacturing high-quality wood and pellet stoves, and their models 50TVL17, 17VL, and 50SVL17 are excellent representations of their commitment to efficiency, functionality, and design. These stoves are designed to meet various heating needs while promoting sustainability and comfort.

The 50TVL17 is a versatile pellet stove that boasts a powerful yet efficient heating capability. With an impressive 50,000 BTU output, this model can heat spaces up to 2,200 square feet, making it ideal for both large and small homes. One of its standout features is the large hopper capacity, allowing for extended burn times without the need for frequent refueling. Additionally, the 50TVL17 comes with an automatic ignition system that ensures quick and reliable starts, enhancing user convenience.

The 17VL, on the other hand, is known for its compact design and high efficiency, capable of heating areas up to 1,500 square feet. This stove operates with a maximum output of 30,000 BTU, making it suitable for standard-sized rooms. It features a simple and efficient feed system, which not only promotes consistent heat output but also reduces pellet consumption. The 17VL is equipped with a programmable thermostat for precise temperature control, allowing users to set their desired warmth and leave the rest to the stove.

The 50SVL17 is another stellar offering, combining the benefits of both wood and pellet heating. This multi-fuel stove boasts a stunning design that can complement various home decors while providing effective heating solutions. With a robust construction and a 50,000 BTU capacity, it can also heat larger spaces, featuring an adjustable blower for optimal heat distribution. The 50SVL17 focuses on minimizing emissions, leveraging advanced combustion technologies that meet and often exceed environmental regulations.

Each of these models incorporates user-friendly features like easy-to-clean designs and large viewing windows that showcase the beautifully burning flames. England's Stove Works has also ensured that safety is paramount, with built-in overheat protection and exhaust safety features.

Overall, the 50TVL17, 17VL, and 50SVL17 from England's Stove Works stand out not only for their impressive heating performance but also for their thoughtful design and eco-compatible technologies. These models are perfect for anyone seeking an efficient and stylish way to heat their spaces while being mindful of their environmental impact.