Section VII Chimney Maintenance | England's Stove Works 50-SHW20

5.The combustor can be removed by dropping the flame impingement plate as described and then the four (4) 3/8” brass nuts (they take a 9/16” wrench) that hold in the combustor collar (Part #CA-1710). This will give you full access to the catalytic combustor. At this point the manufacturer’s cleaning instructions should be followed.

6.This procedure can be reversed to reassemble the combustor in the stove.

B. Gaskets

Each unit has a gasket (Part #AC-DGKC) around the door, which should be replaced every two years. Prior to replacing this gasket the old material must be removed completely – this may require you to scrape the old gasket and adhesive from the channel. After this surface is clean the new adhesive and gasket can be installed. The door should be latched closed for approx. 24 hours to allow the adhesive to harden.

If you are replacing the window gasket (Part #AC-GGK), the gasket already has adhesive on one side. Remove the window first by taking out the two screws that hold the glass in the opening. Then remove the paper backing in the new kit and, while forming a “U” with your fingers, run the new gasket completely around the outer perimeter of the glass. The glass can be put back in the window opening and tightened in place. Both gasket kits can be ordered from your local dealer or from the factory.

C. Firebrick (Part #AC-SB)

This stove is equipped with high density, high temperature firebrick. If the brick becomes chipped or cracked, especially on the sides of the firebox, it should be replaced. The brick can be ordered from your local dealer or from the factory.

D. Finish (Part #AC-MCSP; 12oz. Spray Can)

Your stove has been painted with 1200 degree Metallic Charcoal paint that will retain its original appearance for years. However, if your stove should get wet, some rust spots might appear. These can be removed with plain steel wool and touched up with new paint. If you need to do any painting of the unit we highly recommend using our paint, as others might not adhere to the surface. This paint can be ordered from your local dealer or from the factory.

E. Blower System (Part #AC-17)

The blower system for this unit is placed under the ash lip and moves air under, around and finally exits over the top front of the stove. This blower should be removed and cleaned at least once a year; you can use a vacuum cleaner to remove any loose dust build-up, but do not disassemble the blower. This part has sealed bearings and does not require any oil.

F.Glass Cleaning

Even though this stove is equipped with an air wash system, it will be necessary to

clean the window regularly. The type wood and the mode in which you operate the unit can contribute to a dirty viewing glass. The glass can be cleaned with a stove glass cleaner or a solution of ammonia and water.

SECTION VII: CHIMNEY MAINTENANCE

Cleaning your chimney system is not a difficult task, and many homeowners choose to do this job, but we highly recommend the use of a chimney sweep to clean and inspect the entire system. Remember, a professional can spot problems the homeowner may overlook. NOTE: It is a good idea to thoroughly clean your stove and chimney in the spring to eliminate any lingering odor through the summer months.

24-JC, 50-SHW20, 50-TRW20 specifications

England's Stove Works is a well-respected name in the stove manufacturing industry, known for its high-quality and efficient wood and pellet stoves. Among its popular products are the 50-TRW20, 50-SHW20, and 24-JC models, each offering distinct features and technologies tailored to meet different heating needs.

The 50-TRW20 is a robust wood stove that stands out with its ceramic glass door, allowing for an inviting view of the fire while ensuring optimal safety and efficiency. This model boasts a large firebox, accommodating substantial logs for longer burn times, which reduces the need for frequent reloading. The integrated air wash system helps keep the glass clean for a clearer view. Additionally, its built-in blower fan enhances heat distribution throughout the room, ensuring a cozy atmosphere during cold winters.

Transitioning to the 50-SHW20, this model is designed specifically for homes seeking a compact yet powerful heating solution. Engineered with a modern design, it fits snugly into smaller spaces while delivering substantial heat output. The 50-SHW20 utilizes a versatile multi-fuel capability, allowing it to burn both wood and approved biomass fuels. This adaptability makes it an excellent choice for eco-conscious homeowners looking for renewable heating options. With energy efficiency ratings that meet or exceed EPA standards, the 50-SHW20 is well-regarded for its minimal environmental impact.

Finally, the 24-JC is a charming pellet stove that serves as an excellent alternative for those preferring a cleaner and more controlled ignition process. Featuring a digital control board, users can easily adjust the temperature settings and maintain a constant heat level. Its compact design doesn’t sacrifice power; the 24-JC can heat large spaces effectively while operating quietly. The automatic feed system allows for continuous operation, and the ash clean-out feature makes maintenance simple and hassle-free.

In summary, England's Stove Works offers a range of heating solutions that combine traditional craftsmanship with modern technology. The 50-TRW20 captivates with its aesthetic and efficiency, the 50-SHW20 provides versatility for various fuel types, and the 24-JC stands out for its convenience and eco-friendly operation. Together, these models exemplify the brand's commitment to quality and customer satisfaction in home heating solutions.