England's Stove Works 24-JC, 50-SHW20 Section VI Care and Maintenance, Ash Removal and Disposal

Page 6

4.Allow the stove to burn for about 15 to 20 minutes with the door cracked one-half inch (½”).

5.You can close the door completely, but leave the draft controls open. Allow the stove to burn 10 to 15 minutes in this mode.

6.Close the by-pass damper and burn the unit for another 5 minutes.

7.Once the combustor is accepting the fumes, the slide damper can be adjusted to your preferred setting.

E. Ash Removal and Disposal

Regularly inspect the ash build-up in your stove and remove as necessary. Ashes should be placed in a metal container with an airtight lid. Pending final disposal, the ashes should be placed on a non-combustible surface or on the ground, completely away from all combustible materials. The ashes should be retained in the closed container until all cinders have thoroughly cooled. If you have a masonry or pre- manufactured system, it is essential that your flue be checked for creosote at least once per month.

SECTION VI: CARE AND MAINTENANCE

A.Catalytic Maintenance and Replacement

Note – Your unit will have a 3” thick, 25-cell combustor (manufactured by Applied Ceramics), or it will have a 1” thick, “ceramic foam” type combustor (manufactured by Clear Skies). The following instructions apply to both types, unless otherwise specified.

1.To reach the catalytic combustor, first take out the flame impingement plate by removing the four (4) 3/8” brass nuts (they take a 9/16” wrench). Once the nuts are removed the plate should drop from the bolts and allow you to see the bottom of your combustor.

2.For 25-cell Applied Ceramics combustor: If the combustor is plugged up you will see black soot within the cells on the bottom side of the ceramic piece. This can usually be removed by brushing the combustor with a soft bristled brush. You can also run a pipe stem cleaner through each cell for removal of any internal build-up. This type cleaning can be done without removing the combustor from the stove.

For 1” thick Clear Skies combustor: Follow the instructions provided by Clear Skies pertaining to the cleaning of their combustor.

3.The flame impingement plate (Part #IP-24JC) is located inside the stove and is removed as described earlier. (Note that it should be replaced if it becomes distorted.)

4.The catalytic combustor (Part #AC-6C3) is guaranteed by Applied Ceramics or Clear Skies, the manufacturers. A separate warranty card will be in the manual for this part and should be mailed back to the combustor manufacturer. Both combustors are equivalent, and in the event there is a problem with this item, the manufacturer should be contacted as listed below.

Applied Ceramics Customer Service Dept. P.O. Box 29664 Atlanta, GA 30359 (1-770-448-6888)

Clear Skies Unlimited, Inc. 11208 Cochiti SE Albuquerque, NM 87123 (1-505-237-9519)

Image 6
Contents DEALER. Contact Customer Service @ Read These Instructions Carefully Before InstallationSection I Flue System Safety NoticeSection III Installation Into a Masonry Fireplace Section II Floor ProtectionThere Are Two Methods of Venting Your Insert Direct Connect Direct DumpSection IV Accessory Items Section V Operating InstructionsDraft Control Do Not Over-Fire Your StoveEveryday Fueling Section VI Care and Maintenance Catalytic Maintenance and ReplacementAsh Removal and Disposal Section VII Chimney Maintenance Section Viii Things That Cause the Unit to Smoke Replacement Parts ListBOX Questions/Problems 800 MONROE, VA Section IX What Causes CREOSOTE?One Year Period ProcedureFive Year Period Conditions and ExclusionsPage Dealer Information Unit Information

24-JC, 50-SHW20, 50-TRW20 specifications

England's Stove Works is a well-respected name in the stove manufacturing industry, known for its high-quality and efficient wood and pellet stoves. Among its popular products are the 50-TRW20, 50-SHW20, and 24-JC models, each offering distinct features and technologies tailored to meet different heating needs.

The 50-TRW20 is a robust wood stove that stands out with its ceramic glass door, allowing for an inviting view of the fire while ensuring optimal safety and efficiency. This model boasts a large firebox, accommodating substantial logs for longer burn times, which reduces the need for frequent reloading. The integrated air wash system helps keep the glass clean for a clearer view. Additionally, its built-in blower fan enhances heat distribution throughout the room, ensuring a cozy atmosphere during cold winters.

Transitioning to the 50-SHW20, this model is designed specifically for homes seeking a compact yet powerful heating solution. Engineered with a modern design, it fits snugly into smaller spaces while delivering substantial heat output. The 50-SHW20 utilizes a versatile multi-fuel capability, allowing it to burn both wood and approved biomass fuels. This adaptability makes it an excellent choice for eco-conscious homeowners looking for renewable heating options. With energy efficiency ratings that meet or exceed EPA standards, the 50-SHW20 is well-regarded for its minimal environmental impact.

Finally, the 24-JC is a charming pellet stove that serves as an excellent alternative for those preferring a cleaner and more controlled ignition process. Featuring a digital control board, users can easily adjust the temperature settings and maintain a constant heat level. Its compact design doesn’t sacrifice power; the 24-JC can heat large spaces effectively while operating quietly. The automatic feed system allows for continuous operation, and the ash clean-out feature makes maintenance simple and hassle-free.

In summary, England's Stove Works offers a range of heating solutions that combine traditional craftsmanship with modern technology. The 50-TRW20 captivates with its aesthetic and efficiency, the 50-SHW20 provides versatility for various fuel types, and the 24-JC stands out for its convenience and eco-friendly operation. Together, these models exemplify the brand's commitment to quality and customer satisfaction in home heating solutions.