England's Stove Works 50-SHW25, 50-TRW25, 24-ICD operation manual Section IV Accessory Items

Page 6

SECTION IV: ACCESSORY ITEMS

AC-101/SH-101 Brass Trim

There are three (3) pieces of J-channel trim in this kit that snap onto the two top edges of the unit and the ash apron edge. Remove the protective cover from the trim and match it to the corresponding edge of the stove -- the trim simply slips over the corresponding edge of the unit. If required, high temperature silicone can be used on the inside of the trim.

AC-01 Brass Knobs (Per Set)

The brass knobs have a wide base and sit on the top of the stove.

AC-02 Brass Rail

This accessory is pre-mounted on a metal base and sits on the top of the stove.

AC-IHS/SH-HS25 Side and Rear Heat Shield

This accessory is a two piece heat shield that is installed to the rear of the stove and will give six inches (6”) clearance to a combustible. The shield is attached one piece at a time, with the bolts mounting to the four weld nuts on the rear of the stove. This heat shield will allow six inches (6”) clearance from the rear of the unit; however, the thirty inches (30”) clearance to a combustible will still be required on the sides. The flue pipe must be shielded or double wall if it is less than eighteen inches (18”) from a combustible.

NOTE: You must use the top vent option of your unit with the use of this heat shield.

SECTION V: OPERATING INSTRUCTIONS

A. Building a Fire

Your new stove is equipped with a catalytic combustor, which requires the following start-up procedure. Inspect your unit to ensure the combustor is well seated in the combustor housing.

CAUTION: ALWAYS PULL OUT THE BY-PASS DAMPER COMPLETELY BEFORE OPENING THE FRONT DOOR. NEVER LIGHT YOUR FIRE WITH GASOLINE, KEROSENE, DIESEL FUEL OR CHARCOAL LIGHTER FLUID; THIS COULD BE VERY DANGEROUS.

NOTICE: Your new stove and the connector pipe may smoke for a short period of time. This is called “cooking out” and is no cause for alarm. During the first few hours of operation, it is a good idea to open some doors and windows.

1.Be sure there are no combustible materials in the immediate area of the stove.

2.Pull out the slide damper located under the ash lip and the by-pass damper located on the top right side of the unit.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 24-ICD, 50-SHW25 and 50-TRW25 Existing Flue System Top or Rear ExhaustPage Installation of a New Flue System Section II Floor and Wall ProtectionFloor Protection Wall Protection Section III Placement and InstallationChimney Connector Pipe Heat ShieldSection IV Accessory Items Section V Operating InstructionsDraft Control Do Not Over-Fire Your StoveEveryday Fueling Section VI Care and Maintenance Catalytic Combustor MaintenanceAsh Removal and Disposal Firebrick AC-SB & AC-LB Glass CleaningGaskets Finish AC-MCSPFlue Pipe Maintenance Section VII Chimney and Flue Pipe MaintenanceChimney Maintenance Section Viii Things That could Cause Your Stove to SmokeReplacement Parts List Customer Service Department Box Parts Orders only Monroe, VA Questions 800-245-6489 FaxWarranty Registration for England’s Stove Works

24-ICD, 50-SHW25, 50-TRW25 specifications

England's Stove Works has earned a reputation for crafting solid and efficient heating solutions for homes. Among their popular models are the 50-SHW25, 50-TRW25, and 24-ICD which boast impressive features and technologies designed to enhance performance and provide comfort during colder months.

The England's Stove Works 50-SHW25 is a freestanding wood stove that offers exceptional heating efficiency. With a durable metal construction and a firebox designed to accommodate larger logs, the SHW25 delivers a high heat output of 75,000 BTUs, making it ideal for medium to large spaces. This model includes a large viewing window with an air-wash system that keeps the glass clean while allowing users to enjoy the ambiance of the fire. Furthermore, it features a non-catalytic combustion system, which optimizes burn efficiency and significantly reduces emissions.

Next, the 50-TRW25 wood stove represents a versatile heating option that combines modern design with traditional functionality. Similar to the SHW25, the TRW25 also provides 75,000 BTUs of heat output, making it suitable for heating larger areas. This model is designed with a unique top-loading door which allows for easier loading of wood and a greater range of log sizes. The ceramic glass door not only provides an unobstructed view of the flames but also improves the overall efficiency of the burning process. The TRW25 is also equipped with a built-in ash pan for hassle-free clean-up, further enhancing its user-friendly design.

The 24-ICD, on the other hand, is distinguished as a compact yet powerful option, making it a great choice for smaller spaces. With a maximum heat output of 45,000 BTUs, this model retains impressive efficiency without compromising on style. The 24-ICD features an innovative intelligent combustion design that optimizes airflow for better heat management and reduced emissions. Its small footprint and attractive design allow it to fit seamlessly into a variety of home aesthetics while still providing supplemental heat.

All three models from England's Stove Works come with a robust warranty and support from a well-established manufacturer, ensuring reliability and customer satisfaction. Whether opting for the heavy-duty SHW25, versatile TRW25, or compact 24-ICD, homeowners can expect quality craftsmanship and advanced technology that keeps their spaces warm and cozy throughout the heating season.
Top Page Image Contents