Installation

FREESTANDING PLACEMENT AND INSTALLATION

The first problem you may encounter is getting your stove into your home -- all of our stove products are well constructed, which makes them rather heavy. Three to four adults can normally handle a unit, but we still recommend using a handcart. Never attempt to handle a heating product alone!!! The door and brick can be temporarily removed to lighten the unit (refer to Brick Layout). After the unit is placed into position, install the spring handles and attach any optional equipment.

Chimney Connector Pipe

The black pipe must be six inches (6”) in diameter and at least 24 gauge steel pipe. Do not use aluminum or galvanized steel pipe, as it will not withstand the extreme temperatures generated by the stove. Also, do not use single wall connector pipe as a chimney -- you must connect your stove to a chimney comparable to those listed earlier in this manual. The crimped end of your pipe should be inserted into the flue collar and, by doing this, all the pipe will be reversed. If you use this method the creosote will run back down the inside of your pipe and not out of the joints onto your stove. As a safety precaution, all joints should be cemented and secured with sheet metal screws.

For proper operation the chimney connector should be as short as possible and never exceed a six foot (6’) horizontal run. Horizontal runs of chimney connector pipe should have an upward slope of one quarter of an inch (1/4”) per foot. You will need to maintain eighteen inches (18”) of clearance from the wall and ceiling unless you are using double wall or shielded pipe.

1.Remove all parts from inside the stove body.

2.Select the proper location for the stove. These appliances must not be installed any closer than the minimum clearance to combustible materials shown in Illustration 1. The stove must be installed on a non-combustible surface as shown in Illustration 1 and Illustration 2.

FAILURE TO FOLLOW THE MINIMUM CLEARANCE REQUIREMENTS MAY RESULT IN AN UNSAFE INSTALLATION.

3.If non-combustible materials have been installed on the walls, obtain the minimum clearances from either the manufacturer of these materials or the local building inspector’s office.

4.Install the stovepipe INSIDE the flue collar on the top of the stove, between the stove and the chimney.

5.DO NOT use a grate to elevate the fire.

6.A clearance of 18 inches between the stovepipe and combustible materials is required. Check with authorities having jurisdiction in your area with any questions.

7.All pipe sections must be connected with the male (crimped) end toward the stove.

8.Fasten the stove pipe to the flue collar by the use of three sheet metal screws. Do the same at each additional joint to make the entire installation rigid.

9.Maintain the required diameter flue for the entire installation.

10.If you are connecting the stove to an old masonry flue, be sure to have it inspected for cracks and general condition. Resizing with a stainless steel liner may be required.

11.It is recommended that no more than two 90-degree bends be used in the stovepipe installation. More than two 90-degree bends may decrease the amount of draw, and possibly cause smoke spillage.

12.A damper is not required in this installation. Remove the damper plate in the chimney or secure it in the OPEN position.

13.Single wall flue pipe assemblies must not exceed 10 feet in overall length.

13-NCP 50-SNC13P 50-TNC13P, 13-NCL 50-SNC13L 50-TNC13L, 13-NCG 50-SNC13G 50-TNC13G, 13-NCC 50-SNC13C 50-TNC13C specifications

England's Stove Works is a renowned name in the heating industry, particularly recognized for its high-quality wood and pellet stoves. Among its notable offerings, the 13-NCC, 50-SNC13C, 50-TNC13C, 13-NCG, 50-SNC13G, 50-TNC13G, 13-NCL, 50-SNC13L, 50-TNC13L, 13-NCP, 50-SNC13P, and 50-TNC13P models stand out due to their unique features, innovative technologies, and exceptional performance characteristics.

One of the exemplary features across these models is the use of advanced combustion technology, which ensures an efficient burn process. This technology maximizes heat output while minimizing emissions, making these stoves environmentally friendly and cost-effective. The efficiency ratings for these models often reach upward of 80%, providing homeowners with significant energy savings over time.

The 13-NCC 50-SNC13C and 50-TNC13C models are specifically designed for optimal warmth and comfort. These stoves feature a large firebox that can accommodate larger logs, allowing for longer burn times. The cast-iron construction not only ensures durability but also retention of heat, providing a consistent warmth throughout the space.

In terms of aesthetic appeal, models like the 13-NCG, 50-SNC13G, and 50-TNC13G incorporate stylish designs that can complement various interior décors. These stoves come with options for custom finishes and trim, allowing homeowners to personalize their heating sources.

The 13-NCL, 50-SNC13L, and 50-TNC13L models also emphasize user-friendliness with features like easy-to-use controls and straightforward maintenance processes. They often include removable ash pans for hassle-free cleaning, making them practical for everyday use.

The 13-NCP, 50-SNC13P, and 50-TNC13P versions take things a step further by offering enhanced safety features. These include tempered glass doors for visibility of the fire while retaining heat and automatic shut-off systems that prevent overheating.

Overall, England’s Stove Works’ range of models combines efficiency, aesthetics, and safety, making them an attractive option for homeowners seeking reliable heating solutions. Whether for primary heating or supplemental warmth, these stoves deliver on both performance and design, ensuring a comfortable home environment. Each model addresses different needs, making it possible for consumers to find the perfect fit for their living spaces.