Enviro 50-1385, C-10808, C-11114 owner manual USE of Cordwood is Prohibited by LAW

Page 4

Introduction

IMPORTANT SAFETY DATA:

Please read this entire Owner’s Manual before installing or operating your ENVIRO Pellet Stove. Failure to follow these instructions may result in property damage, bodily injury or even death. Contact your local building or fire official to obtain a permit and any information on installation restrictions and inspection requirements for your area.

To prevent the possibility of a fire, ensure that the appliance is properly installed by adhering to the installation instructions. An ENVIRO dealer will be happy to assist you in obtaining information with regards to your local building codes and installation restrictions.

The stove’s exhaust system works with negative combustion chamber pressure and a slightly positive chimney pressure. It is very important to ensure that the exhaust system be sealed and airtight. The ash pan and viewing door must be locked securely for proper and safe operation of the pellet stove.

Do not burn with insufficient combustion air. A periodic check is recommended to ensure proper combustion air is admitted to the combustion chamber. Setting the proper combustion air is achieved by adjusting the slider damper located in the front of the unit under the ash pan.

Soot or creosote may accumulate when the stove is operated under incorrect conditions such as an extremely rich burn (black tipped, lazy orange flames).

If you have any questions with regard to your stove or the above-mentioned information, please feel free to contact your local dealer for further clarification and comments.

SAFETY WARNINGS AND RECOMMENDATIONS:

Caution: Do not connect to any air distribution duct system.

Do not burn garbage or flammable fluids such as gasoline, naptha or engine oil.

Unit hot while in operation. Keep children, clothing and furniture away. Contact may cause skin burns.

FUEL: This pellet stove is designed and approved to only burn wood pellet fuel with up to 3% ash content. Dirty fuel will adversely affect the operation and performance of the unit and may void the warranty. Check with your dealer for fuel recommendations.

THE USE OF CORDWOOD IS PROHIBITED BY LAW.

SOOT: Operation of the stove with insufficient combustion air will result in the formation of soot which will collect on the glass, the heat exchanger, the exhaust vent system, and may stain the outside of the house. This is a dangerous situation and is inefficient. Frequently check your stove and adjust the slider/damper as needed to ensure proper combustion. See: OPERATING INSTRUCTIONS - SLIDER / DAMPER

SETTING.

CLEANING: There will be some build up of fly ash and small amounts of soot in the exhaust. This will vary due to the ash content of the fuel used and the operation of the stove. It is advisable to inspect and clean the exhaust vent semi-annually or every two tons of pellets.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Empress Table of Contents Introduction Store pellets at least 36 1 m away from the pellet stoveUSE of Cordwood is Prohibited by LAW Keep ASH PAN Free of RAW Fuel Slider / Damper Must be SET AT Time of Installation Operating InstructionsSpecial Notes Control panelThermostat / Switch Mode Initial START-UP See aboveRoutine Cleaning and Maintenance Tools Required to Clean UnitDoor Glass Cleaning When needed Burn POT and Liner 2-3 daysDo not Place Unburned or RAW Pellet Fuel in ASH PAN Post Season CLEAN-UP Cleaning SurfacesFirebox Panel Replacing Door GlassTo the Distributor WarrantyFor the do-it-yourself Individual Installation Data Sheet Name of Owner Address

C-10808, C-11114, 50-1385 specifications

Enviro 50-1385, C-11114, and C-10808 are innovative formulations designed for various applications in the field of environmental engineering and industrial processes. Each of these formulations boasts unique main features, technologies, and characteristics that contribute to their efficacy and versatility.

Enviro 50-1385 is a cutting-edge product known for its exceptional biodegradability and low toxicity. It effectively addresses waste management and pollution reduction in industrial settings. This formulation is characterized by its ability to degrade organic compounds efficiently, making it ideal for use in wastewater treatment facilities. The advanced microbial technology incorporated in Enviro 50-1385 enhances its performance, ensuring that harmful pollutants are broken down, thus reducing environmental impact. Additionally, its formulation is designed to work effectively across a wide range of pH levels and temperatures, providing reliable performance in diverse conditions.

C-11114 stands out for its robust chemical composition, making it suitable for heavy-duty industrial cleaning and degreasing applications. This formulation features a blend of surfactants and solvents that provide powerful cleaning action while remaining environmentally friendly. The unique surfactant technology in C-11114 allows it to penetrate and lift grease and oils quickly, making it an ideal choice for manufacturers seeking effective cleaning solutions without compromising on environmental safety. Its low VOC (volatile organic compounds) content further aligns with modern regulatory requirements, making it a responsible choice for businesses focusing on sustainability.

C-10808 is designed for use in environmentally sensitive areas, combining effectiveness with safety. This formulation features advanced encapsulation technology, which allows the active ingredients to maintain potency while minimizing direct exposure during application. C-10808 is especially effective in controlling odors and removing contaminants in air and water systems, making it an essential tool in environmental remediation projects. The user-friendly application method, combined with its fast-acting properties, makes C-10808 a preferred choice for field technicians and environmental engineers alike.

In summary, Enviro 50-1385, C-11114, and C-10808 offer distinct advantages for various industrial and environmental applications. With their innovative technologies and sustainable characteristics, these formulations represent a significant advancement in providing effective solutions while prioritizing environmental safety. Each product is thoughtfully developed to meet the evolving needs of industries committed to sustainability and responsible practices.
Top Page Image Contents