Enviro C-10808, 50-1385 Introduction, Store pellets at least 36 1 m away from the pellet stove

Page 3

Introduction

* This manual is designed for the home owner in conjunction with the technical manual. *

RATING LABEL LOCATION:

The rating label is located on the hopper top behind the surround panel.

PELLET QUALITY:

Pellet quality is important, please read the following:

Your enviro pellet stove has been designed to burn wood pellets only. Do not use any other type of fuel, as this will void any warranties stated in this manual.

The performance of your pellet stove is greatly affected by the type and quality of wood pellets being burned. As the heat output of various quality wood pellets differs, so will the performance and heat output of the pellet stove.

CAUTION: It is important to select and use only pellets that are dry and free of dirt or any impurities such as high salt content. Dirty fuel will adversely affect the operation and performance of the unit and will void the warranty.

ASH: The ash content of the fuel and operation of your stove will directly determine the frequency of cleaning. The use of high ash fuels may result in the stove needing to be cleaned daily. A low ash fuel may allow longer intervals between cleaning.

CLINKERING: [clinkers are silica (sand) or other impurities in the fuel that will form a hard mass during the burning process]. This hard mass will block the air flow through the Burn Pot Liner and affect the performance of the stove. Any fuel, even approved types, may tend to clinker. Check the Burn-Pot Liner daily to ensure that the holes are not blocked with clinkers. If they become blocked, remove the liner (when the unit is cold) and clean/scrape the clinkers out. Clean the holes with a small pointed object if required. Refer to the section Routine Cleaning and Maintenance.

PELLET FEED RATES: Due to different fuel densities and sizes, pellet feed rates may vary. This may require an adjustment to the slider damper setting or to the auger feed trim setting on Low.

Since Sherwood Industries Ltd. has no control over the quality of pellets that you use, we assume no liability for your choice in wood pellets.

Store pellets at least 36” (1 m) away from the pellet stove.

AUTOMATIC SAFETY FEATURES:

Your pellet Stove has the following safety features:

A)The stove will shut off when the fire goes out and the exhaust temperature drops below 120 °F (49°C).

B)The stove has a high temperature safety switch. If the temperature on the hopper reaches 200 °F (93 °C) the auger will automatically stop and you will get a #2 flash code, and the stove will shut off when the exhaust temperature cools. If this happens call your local dealer to reset the 200 °F (93 °C) high limit switch. FIND THE REASONS WHY THE UNIT OVERHEATED.

C)The unit is equipped with a vacuum switch to monitor the venting and the build up of ash in the burn pot; if either becomes blocked the vacuum switch will turn off the auger and the stove will shut off.

3

Image 3
Contents Empress Table of Contents Store pellets at least 36 1 m away from the pellet stove IntroductionUSE of Cordwood is Prohibited by LAW Keep ASH PAN Free of RAW Fuel Operating Instructions Slider / Damper Must be SET AT Time of InstallationControl panel Special NotesInitial START-UP See above Thermostat / Switch ModeBurn POT and Liner 2-3 days Routine Cleaning and MaintenanceTools Required to Clean Unit Door Glass Cleaning When neededDo not Place Unburned or RAW Pellet Fuel in ASH PAN Replacing Door Glass Post Season CLEAN-UPCleaning Surfaces Firebox PanelWarranty To the DistributorFor the do-it-yourself Individual Name of Owner Address Installation Data Sheet

C-10808, C-11114, 50-1385 specifications

Enviro 50-1385, C-11114, and C-10808 are innovative formulations designed for various applications in the field of environmental engineering and industrial processes. Each of these formulations boasts unique main features, technologies, and characteristics that contribute to their efficacy and versatility.

Enviro 50-1385 is a cutting-edge product known for its exceptional biodegradability and low toxicity. It effectively addresses waste management and pollution reduction in industrial settings. This formulation is characterized by its ability to degrade organic compounds efficiently, making it ideal for use in wastewater treatment facilities. The advanced microbial technology incorporated in Enviro 50-1385 enhances its performance, ensuring that harmful pollutants are broken down, thus reducing environmental impact. Additionally, its formulation is designed to work effectively across a wide range of pH levels and temperatures, providing reliable performance in diverse conditions.

C-11114 stands out for its robust chemical composition, making it suitable for heavy-duty industrial cleaning and degreasing applications. This formulation features a blend of surfactants and solvents that provide powerful cleaning action while remaining environmentally friendly. The unique surfactant technology in C-11114 allows it to penetrate and lift grease and oils quickly, making it an ideal choice for manufacturers seeking effective cleaning solutions without compromising on environmental safety. Its low VOC (volatile organic compounds) content further aligns with modern regulatory requirements, making it a responsible choice for businesses focusing on sustainability.

C-10808 is designed for use in environmentally sensitive areas, combining effectiveness with safety. This formulation features advanced encapsulation technology, which allows the active ingredients to maintain potency while minimizing direct exposure during application. C-10808 is especially effective in controlling odors and removing contaminants in air and water systems, making it an essential tool in environmental remediation projects. The user-friendly application method, combined with its fast-acting properties, makes C-10808 a preferred choice for field technicians and environmental engineers alike.

In summary, Enviro 50-1385, C-11114, and C-10808 offer distinct advantages for various industrial and environmental applications. With their innovative technologies and sustainable characteristics, these formulations represent a significant advancement in providing effective solutions while prioritizing environmental safety. Each product is thoughtfully developed to meet the evolving needs of industries committed to sustainability and responsible practices.