Enviro C-10629 owner manual ASH PAN weekly, Not Place Unburned or RAW Pellet Fuel in ASH PAN

Page 11

Routine Cleaning and Maintenance

If the glass has build up that can not be removed with only the cloth, clean the glass using paper towel and a gas appliance glass cleaner, this may be purchased through most dealers. If a gas appliance glass cleaner is not available, use a damp paper towel dipped in fly ash to clean the glass. After the glass has been cleaned use the dry soft cloth to wiping down the outside and inside of the glass.

ASH PAN (weekly)

This part is located under the door. To remove the ash pan, open the cover from the right hand side, and lift the ash pan up and out. Dump the ashes into a metal container stored away from combustibles. Monitor the ash level every week. Remember that different pellet fuels will have different ash contents. Ash content is a good indication of fuel efficiency and quality. Refer

to “SAFETY WARNINGS AND RECOMMENDATIONS” for

disposal of ashes. Vacuum the inside of the ash pan compartment inside the pedestal including the hole at the top back of the compartment. Replace the ash pan and close pedestal door. DO

NOT PLACE UNBURNED OR RAW PELLET FUEL IN ASH PAN.

AIR INTAKE (semi-annually)

Inspect periodically to be sure that it is not clogged with any foreign materials.

EXHAUST PASSAGES (semi-annually)

Heat exchanger tubes

cleaner handle.

Burn pot

clean-out lever.

Empty ash box.

Vacuum inside ash

box compartment.

Figure 6: Bern Open

To prevent build up of fly-ash all the exhaust passages must be cleaned and vacuumed.

Clean behind clean-out covers:

Open ash box cover.

Remove ash box.

Using a 5/16” socket, loosen the six (6) screws in the ash box compartment; four (4) on the back and one (1) on each side (see Figure 7).

Rotate the back cover counter- clockwise to remove and rotate the side covers to open them.

Vacuum out all three (3) chambers.

Close all the clean-out covers and tighten the screws.

Loosen the screw & rotate the cover (left & right sides)

Loosen the four (4) screws, rotate counter-clockwise & remove.

Figure 6: Bern Clean-Out Covers.

11

Image 11
Contents Bern Table of Contents Store pellets at least 36 1 m away from the pellet stove Reasons WHY the Unit OverheatedIntroduction USE of Cordwood is Prohibited by LAW Keep ASH PAN Free of RAW Fuel Rating label is located on the inside of the ash pan cover Efficiency Operating InstructionsInitial START-UP See above Thermostat / Switch ModeSlider/Damper Plate in Unit Special NotesTools Required to Clean Unit Routine Cleaning and MaintenanceExhaust Passages semi-annually ASH PAN weeklyNot Place Unburned or RAW Pellet Fuel in ASH PAN Blower Mechanisms season Post Season CLEAN-UPDoor Glass Replacement Exhaust Vent annuallyFor the do-it-yourself Individual WarrantyTo the Distributor Name of Owner Address Installation Data Sheet

C-10629 specifications

Enviro C-10629 is an innovative product designed for effective environmental management and sustainability solutions. This versatile formulation is particularly well-regarded for its ability to combat a wide range of environmental challenges, making it an essential tool for various industries, including agriculture, waste management, and soil remediation.

One of the main features of Enviro C-10629 is its biodegradable nature, which aligns with modern ecological practices. This characteristic not only helps minimize environmental impact but also ensures that the product can be safely used in sensitive ecosystems without leaving harmful residues. The formulation is designed to break down into non-toxic by-products, thereby contributing to a circular economy.

The technology behind Enviro C-10629 is based on advanced microbial and enzymatic activity. This allows the product to work in synergy with the natural processes found in soil and water environments. By harnessing the power of beneficial microorganisms, Enviro C-10629 enhances nutrient availability and improves soil health, facilitating robust plant growth and crop yields.

In terms of characteristics, Enviro C-10629 exhibits excellent compatibility with other agricultural inputs, which allows it to be easily integrated into existing practices. This compatibility ensures that farmers and land managers can use it in conjunction with fertilizers and other soil amendments without any adverse reactions. As a result, individuals can maximize the effectiveness of their agricultural inputs while promoting environmental sustainability.

Furthermore, Enviro C-10629 is designed to be user-friendly and requires minimal application effort. With an effective delivery system, it can be applied through various methods, including spraying, drenching, or mixing with irrigation systems. This ease of use ensures that users can implement the product without extensive training or specialized equipment.

Overall, Enviro C-10629 stands out as a cutting-edge solution for environmental challenges. Its biodegradable composition, advanced microbial technology, compatibility with other agricultural practices, and user-friendly application methods make it an essential product for those seeking to promote sustainability while maintaining productivity. As industries increasingly prioritize eco-friendly solutions, Enviro C-10629 represents a significant step forward in achieving these goals.