Harman Stove Company PP38+ manual #1 Preferred method, #2 Preferred method

Page 9

Venting

P38+ Pellet Stove

Fig. 8

Fig. 9

#1 Preferred method

This method provides excellent venting for normal op- eration and allows the stove to be installed closest to the wall. Two inches from the wall is safe; however, four inches allows better access to remove the rear panel. The vertical portion of the vent should be three to five feet high. This vertical section will provide natural draft in the event of a power failure.

3 ft.

to combustibles

#2 Preferred method

This method also provides excellent venting for normal operation but requires the stove to be installed farther from the wall. The vertical portion of the vent should be three to five feet high and at least three inches from a combustible wall. This vertical section will provide natural draft in the event of a power failure.

CAUTION

KEEP COMBUSTIBLES (SUCH AS GRASS,

LEAVES, ETC.) AT LEAST 3 FEET AWAY FROM

THE FLUE OUTLET ON THE OUTSIDE OF THE

BUILDING.

3 ft.

to combustibles

10

Image 9
Contents Harman PP38+ Pellet Stove Installation & Operating ManualContents Installing Rear Cover Panels Assembly and InstallationUnpacking FirebrickAssembling the door Door Glass Door Assembly/Installation TipsGlass Retainer Clips Paw BoltMobile Home Installation InstallationMum VentingImportant Notices Outside Air Vent Pipe#2 Preferred method #1 Preferred method#5 Installing into an existing fireplace Chimney US only #4 Installing into an existing chimney US only#7 Installing into an existing chimney US and Canada Blower Speed Adjustment Turbo ControlFeed Rate Starting First Fire OperationMaintenance CleaningRemoving Ashes Soot and Fly Ash Feeder does not Feed Trouble ShootingFeeder Parts SpecificationsWiring Diagram Installing Thermostat What is a thermostat?Low Draft Adjustment cold stove only Thermostat optionalCleaning Gold Door OptionsSunrise Gold Trim Gold Door Side Heat Shields Hopper Extension OptionsHarman Gold Warranty Year Transferable Limited