ASSEMBLY INSTRUCTIONS
1.
WARNING! Always make sure to close the valve on the propane tank (not included) prior to assembling the Propane Stove, performing maintenance, or making any adjustments to the unit.
2.
CAUTION! This product is machine manufactured. Be aware of sharp edges. Use heavy duty work gloves and ANSI approved safety impact eye goggles when assembling.
3.Turn the Propane Stove upside down, and attach a Rubber Foot (7) to each corner of the unit. (See Assy. Diagram.)
4.To attach the three Temperature Control Knobs (4), loosen the countersunk Screw in the Knob. Insert the Knob onto the Burner Control Shaft by aligning the flat edges of the Knob and Shaft. Then, firmly tighten the Screw.
(See Figure A.)
5.NOTE: The Propane Stove requires the attachment and use of the Model 91357 LP Regulator & Hose Kit or Model 91359 LP Regulator & Hose Kit which are sold separately by Harbor Freight Tools. (See Figure A.)
6.A LP regulator MUST be used: To attach the LP Regulator & Hose Kit to the Propane Stove, remove the plastic protective cap from the Inlet Connection Nozzle (5) on the Propane Stove. Then, screw the Hose Connector firmly onto the Inlet Connection Nozzle. (See Figure A.)
FIGURE A | MODEL 91357 OR MODEL 91359 | ||||
|
|
|
| LP REGULATOR & HOSE KIT | |
|
|
|
| (NOT INCLUDED) | |
|
|
|
| HOSE |
|
|
|
|
| CONNECTOR |
|
|
|
|
| INLET | GAS VALVE PROPANE TANK |
|
|
|
| ||
|
|
|
| ||
|
| TEMPERATURE | CONNECTION | ||
|
| CONTROL KNOB | NOZZLE | (NOT INCLUDED) | |
(4) | (5) |
| |||
SKU 43343 | For technical questions, please call | PAGE 6 |