Harbor Freight Tools 43343 operating instructions Operating Instructions

Page 7

7.NOTE: The propane tank used must be constructed and marked in accordance with the specifications for LP propane cylinders by the U.S. Department of Transportation. (See Figure A.)

8.To connect to the propane tank, first make sure the Temperature Control Knobs (4) of the Propane Stove are in their “OFF” positions. Then, screw the Gas Valve of the LP Regulator & Hose Kit firmly onto the propane tank’s discharge pipe.

(See Figure A.)

OPERATING INSTRUCTIONS

1.CAUTION! Always use clean equipment and utensils. Before using the Propane Stove, and after using this product, clean all parts in warm, clean water and antibacterial soap. Then, thoroughly dry.

2.NOTE: Higher altitudes may affect the cooking efficiency of the Propane Stove.

3.Make sure the Propane Stove and propane tank are located on a clean, dry, level surface capable of supporting the weight of the Stove and propane tank. Keep the Propane Stove and propane tank away from other flammable objects.

WARNING! NOT FOR INDOOR USE.

4.Check to make sure the Temperature Control Knobs (4) on the Propane Stove are in their “OFF” positions. Open the gas valve on the propane tank and check and smell for gas leaks. Perform a bubble test by applying warm soapy water over every joint, regulator, fitting, and anywhere else there may be a possible leak. Observe carefully to see if bubbles expand, indicating a leak. A large leak can blow the soapy solution away instead of forming bubbles. If leaks are found, do not use the Propane Stove until the leaks have been stopped. After testing, make sure to close the gas valve on the propane tank.

5.To use the Burners (2 and 2A), open the gas valve on the propane tank. Apply a long, lighted match or a fireplace lighter to the Burner which is to be lit. Keep fingers and hands well away from the Burners. Next, push the relevant Tem- perature Control Knob (4) and turn it to its “ON” position. Once the Burner is lit, safely dispose the match and adjust the Temperature Control Knob to the desired setting. The Grill Chamber (3) will be hot while the Middle Burner is in use. (See Assy. Diagram.)

6.To use the Grill Chamber (3), open the Grill Door (8) and remove the Tray with Rack (9). Place the food on the Rack and push the Tray into the Grill Chamber. Close the Grill Door securely. Then, light the center Burner (2A) to grill the food. When the food is cooked, turn off the gas and use the Grill Handle (10) to remove the Tray with Rack. The center burner will have an open flame while the Grill

Chamber (3) is in use; take appropriate precautions. (See Assy. Diagram.)

REV 12/06, 02/07

SKU 43343

For technical questions, please call 1-800-444-3353.

PAGE 7

Image 7
Contents Cook & Grill Stove Unpacking Product SpecificationsGeneral Safety Warnings and Precautions Save this ManualSpecific Safety Warnings and Precautions Risk of Fire AND/OR Explosion Carbon Monoxide Inhalation HazardRisk of Burns -- Stove Gets Very HOT During USE See Figure a Assembly InstructionsOperating Instructions See Assy. Diagram INSPECTION, MAINTENANCE, and CleaningFigure B Please Read the Following CarefullyPart Description Qty Parts List and Assembly Diagram