Harman Stove Company 3-90-70738 manual Assembly, Blower, Shaker Handle, Firebricks

Page 4

Assembly

Blower

The blower slides into the channel bracket on the rear of the stove as shown at right. Plug the blower into a properly grounded receptacle.

Shaker Handle

The shaker handle installs onto the shaker handle mount using the two hex-bolts and washers provided.

Firebricks

The SF250 uses 14 “standard” firebricks, as shown below. These standard firebricks measure 9” X 4½” X 1¼” each. The firebricks are already installed in the stove but can be removed to lighten the stove for moving. The doors can also be removed by simply lift- ing them off of the hinges.

Firebrick Diagram

Image 4

Contents Installation & Operating Manual Harman SF 250 Coal StoveTable of Contents Safety Considerations Curing PaintMobile Homes Keep Ash Pan EmptyAssembly BlowerShaker Handle FirebricksInstallation Adjustable Leveling FeetLocating the stove Clearance to CombustiblesTypes Of Chimneys Chimney & ventingThere are three types of class a chimneys Possible causes of insufficient draft If YOU have a Chimney FireOperating instructions Maintenance Periodic and Normal Everyday MaintenanceWater coil option Water Coil InstallationExample 1 Thermo-siphon Method. less than 10 feet Example 2 Circulator Method. more than 10 feet Warranty Harman Gold WarrantyTesting label