MAINTENANCE
CAUTION :
Always be sure that the tool is switched off and unplugged before attempting to perform inspection and maintenance.
After use
Always remove the sponge from the tool and wash the sponge in detergent solution. Dry the sponge thoroughly in a breezy shaded area.
(Note)
0 If you do not wash the sponge after each use, the wax absorbed in the sponge will dry and the sponge will become heavier, less porous and dirty. This could cause greater vibration of the tool, resulting poor finish.
1
I | Never use an electric washer |
| to clean the sponge. |
0 Do not wash the sponge too harshly, or the Velcro sheet on the sponge will come off.
Wipe the tool off with the soft cloth dampened in detergent solution. Never use thinner or benzine.
Storage
Before storing the tool, remove moisture from the tool and dry the sponge thoroughly.
(Note)
Store the tool with the sponge removed, or the sponge may be deformed.
To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
7