Natural Gas Installation

1.Under the grill, remove the NG gas regulator assembly from the main gas pipe. Once the NG gas regulator is removed, the main gas pipe will be showing under grill. (See Fig 1)

2.Using pipe sealant, attach the “T” Fitting to the main gas pipe coming out of the bottom of the grill. (See Fig 2)

3.Using pipe sealant, attach a 3/8” flared fitting to the side of the “T” fitting. (See Fig 3)

4.Attach the one end of the flex line to the fitting on the side of the “T” fitting. Connect the other end of the flex line to the side burner valve.

(See Fig 4)

Note: This line can be extended using a 3/8” flared coupling and an additional flex line if necessary.

5.Using pipe sealant, attach a 3/8” nipple to the bottom of the “T” fitting. (See Fig 5)

6.Using pipe sealant, attach the NG gas regulator to the 3/8” nipple. (See Fig 6)

7.Attach the NG gas line to the bottom flared fitting. (See Fig 7)

Note: Make sure all fittings are tightened with a wrench.

Fig.6

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig.7

Fig. 5