Pelco NET5308T-EXP manual Connecting Power, Connecting Sequence Monitor

Page 24

A5

A5 A6 A7 A8

NO

C

NC

NO

C

NC

100-200 VAC - 50/60 HZ

0.7 AMP

Figure 23. Connecting Alarms

CONNECTING POWER

The power supply incorporated into the NET5308T-EXP is tested and certified for high reliability applications. The unit has an autoranging power supply that adapts automatically to voltages between 100 VAC and 240 VAC (50/60 Hz).

For greater reliability, you can also install an uninterruptible power supply (UPS) (not supplied). UPS devices maintain a limited amount of backup battery power in case the main power fails. The UPS should have a minimum rating of 200 VA for one NET5300B and two NET5308T-EXP units.

To connect power:

1.Connect one of the supplied US, European, or UK standard power cords to rear of the unit.

2.Connect the cord to the appropriate power source.

Refer to Unit Startup on page 26 to power up the unit.

CONNECTING SEQUENCE MONITOR

Use the SEQ output connector during installation to display video sequentially from each video input. The unit displays each channel for two seconds. It displays a black screen for channels without video. Use this feature to verify camera installation.

To display video from each connected video source:

1.Connect a video monitor to the SEQ output connector.

2.Start the NET5308T-EXP, the monitor, and each video source.

3.Verify the video from each source and troubleshoot as necessary.

24

C2655M-A (10/08)

Image 24
Contents Endura NET5308T-EXP Page Contents List of Illustrations List of TablesRegulatory Notices Video Quality CautionFrame Rate Notice Regarding USER-SELECTED Options Description Parts List Before You BeginQty Description Package Contents Application Scenario Shown Actual SizeSecurity Network with One NET5300B and Two NET5308T-EXPs Product Serial Number Placement Product Serial Number LabelRack Mounting BracketsAssembling a Support Rail Repeat for the other rail set Mounting the NET5308T-EXP into the Rack Tightening the Thumbscrews Connecting to the NET5300B ConnectionsVideo USB Port InputsConnecting Video Input and Output Devices Cable Type Maximum Distance RG6/UConnecting Audio Connector TipConnector SleeveConnecting Relay Devices Relay Pin Label LeadConnecting Alarms Supervised AlarmsUnsupervised Alarms Pin Label Lead Connecting Power Connecting Sequence MonitorFront Panel Controls and Indicators OperationUnit Startup Unit ShutdownTroubleshooting Problem Possible Causes Suggested RemedySpecifications Model NumberPower Page Product Warranty and Return Information

NET5308T-EXP specifications

The Pelco NET5308T-EXP is an advanced network video encoder designed for high-performance video surveillance applications. This versatile device is notable for its ability to transform analog video feeds into digital signals, allowing for seamless integration with modern IP-based systems. This makes it an essential component for facilities looking to upgrade their security setups while retaining existing cameras.

One of the key features of the NET5308T-EXP is its capacity to handle up to eight analog video channels. This multi-channel capability allows users to manage multiple cameras through a single device, simplifying the installation and reducing the overall cost of upgrading surveillance systems. Each channel can process video in high-definition, ensuring that captured footage maintains clarity and detail, which is crucial for effective monitoring and incident investigation.

The NET5308T-EXP employs advanced H.264 video compression technology, which optimizes bandwidth usage without compromising video quality. This codec allows for the transmission of high-resolution video streams while minimizing data storage requirements. With the growing need for efficient data management in surveillance systems, this feature becomes invaluable, particularly in environments where bandwidth is limited.

Another significant aspect of the NET5308T-EXP is its support for Power over Ethernet (PoE). This technological integration enables the device to receive power and transmit data over a single Ethernet cable, greatly simplifying installation. It eliminates the need for multiple power sources and power adapters, allowing for cleaner setups and reducing cable clutter.

Moreover, the encoder includes advanced motion detection capabilities, which can trigger alerts based on movement within the camera’s field of view. These features can be essential for ensuring that security personnel are notified of potential security breaches in real time. Additionally, the device supports various networking protocols, enhancing its compatibility with a wide range of video management systems.

The NET5308T-EXP is designed for reliability and durability in various operating conditions. Its robust construction allows it to function in a range of environments, making it suitable for indoor and outdoor applications alike. With features such as video loss detection and alarm inputs, the device further assures its status as a top-tier solution for comprehensive security needs.

Overall, the Pelco NET5308T-EXP is an exceptional choice for organizations looking to modernize their surveillance technology without the need to overhaul existing infrastructure. With its multi-channel support, advanced compression technology, PoE capabilities, and intelligent alert systems, it represents a significant advancement in video surveillance technology, providing users with high-quality performance and flexibility.