Slide-In Range Specifications

Slide-In Range

FPGS3085K F 30" Gas

•Product Shipping Weight (approx.) – 250 Lbs.

•Voltage Rating – 120V / 60 Hz / 15 Amps

•Connected Load (kW Rating) @ 120 Volts = 1.2 kW

(For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.)

•Amps @ 120V = 10 Amps

•Always consult local and national electric and gas codes.

•Make sure wall coverings around range can withstand heat generated by range.

•Linoleum or any other synthetic floor covering located beneath range, must be capable of withstanding minimum heat of 90° F above room temperature without shrinking, warping or discoloring. Insulating pad or 1/4"-thick plywood required between range and a carpeted floor.

•Do not obstruct flow of combustion air at oven vent nor around base or beneath lower front panel of range. Range requires fresh air for proper burner combustion.

•Range ships with 3/4" factory regulator.

•LP Gas Conversion Kit supplied.

•Gas supply piping can be routed through side wall of right cabinet. Right side cabinet is ideal location for main shutoff valve.

•Countertop MUST be level in all directions and adjustable range height at least 1/16" greater than tallest cabinet height, to ensure metal rangetop flange will fit properly on countertop edge.

•When installing optional Backguard Kit, cutout depth of 21-3/4" minimum / 22-1/8" maximum needs increased to 24".

•Overhead cabinetry should not exceed a 13" maximum depth.

•Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than maximum width of appliance.

•Allow 24" minimum clearance between rangetop and bottom of cabinet when bottom of wood or metal cabinet is protected by not less than 1/4" flame-retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper. Allow 30" minimum clearance when cabinet is unprotected.

•Allow 5" minimum clearance from edge of rangetop to nearest combustible wall on either side of unit.

•To reduce risk of fire when using overhead cabinetry, install range hood that projects horizontally a recommended minimum of 5" beyond bottom of cabinets.

Countertop Preparation

For detailed preparation instructions, refer to installation guide on the web.

•Flat square-finish (flat) countertop requires no preparation since rangetop flange lays directly on countertop edge.

•Formed front-edged countertops require front molded edge to be shaved flat 3/4" from each front corner of opening.

•Tile countertops may need cut back 3/4" from each front corner of opening and /or rounded edge flattened.

•For existing cutout width greater than 30-1/16" reduce the 3/4" overlap dimension or for cutout width of 29", replace actual side trim panels with smaller side trim panels, available with optional Side Trim Kit (refer to detailed kit installation instructions).

Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions.

Optional Accessories

•Rear Filler Kit: Black – (PN # 901193-9010).

•Side Panel Kit: Black – (PN # 903074-9010).

•Backguard Kit: Black – (PN # 903046-9010).

•Side Trim Kit: Black – (PN # 903075-9010).

USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com	Accessories information available	Specifications
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca	on the web at frigidaire.com	subject to change.

FPGS3085K 11/11

FPGS3085K F specifications

The Frigidaire FPGS3085KF is a standout model within Frigidaire's lineup of cooking appliances, delivering exceptional performance and versatility for the modern kitchen. This 30-inch gas range is designed to meet the needs of avid cooks while maintaining stylish aesthetics.

One of the hallmark features of the FPGS3085KF is its powerful oven capacity, which boasts a generous 5.0 cubic feet of space. This ample room allows for the preparation of multiple dishes simultaneously, making it ideal for family gatherings or dinner parties. The oven also includes a convection feature, which circulates hot air for even cooking and browning. This technology significantly enhances the baking experience, ensuring that meals come out perfectly cooked every time.

The range also features an integrated griddle, providing a flat cooking surface for a variety of foods, from pancakes and eggs to grilled sandwiches. This adds versatility to your cooking options and eliminates the need for additional cookware.

Another important characteristic of the Frigidaire FPGS3085KF is its durable cast iron grates. These grates not only provide a sturdy platform for pots and pans but also enhance heat retention, ensuring consistent cooking results. The continuous design allows for easy movement of cookware across the burners, making it convenient when switching pots on the stovetop.

This model includes five burners with varying heat outputs, catering to different cooking techniques. The high-powered burner is perfect for searing, while the low simmer burner allows for careful sauce preparation. This spectrum of heat options gives chefs the ability to handle a wide range of culinary tasks.

In terms of design, the Frigidaire FPGS3085KF features a sleek stainless-steel finish and modern controls, elevating any kitchen's appearance. The oven door is equipped with a large window, allowing for easy monitoring of the cooking process without the need to open the door and disrupt heat.

Additionally, the range comes with features such as SpaceWise expansion, which offers flexibility in burner usage, and a self-cleaning function to simplify maintenance. The FPGS3085KF encapsulates the essence of functionality combined with modern technology, making it a worthy addition for anyone passionate about cooking. With its combination of performance, features, and style, the Frigidaire FPGS3085KF stands out as an excellent choice for today's cooking enthusiasts.