LEARN KC To “define” a second Key- Card for use with the set. Please read the information under “KeyCard
To quit the DSC programming mode and store the adjustment:
•Press DSC.
If the setting remains unchanged within 8 seconds, the system will automatically store the last adjustment. The display will switch back to the previous condition.
Overview of the DSC factory settings
TA VOL | : 4 |
BEEP | : 3 |
LED (Code) : 1 | |
LOUD | : 4 |
RM | : OFF |
LOCAL | : 1 |
DIS | : 1 |
Appendix
Care notes
Mechanism/cassette tapes
To avoid possible problems, you should not use cassette tapes longer than 60 or 90 minutes (C60/C90). Store your tapes in a cool place away from dirt, dust and tempera- tures exceeding 50 ° Celsius. Allow very cold tapes to warm up before playing them in order to avoid uneven tape transport. After approximately 100 hours of use, dust partic- les collected on the playback head or roller may lead to tape run problems and sound distortions.
Use a head cleaning tape to remove normal dirt
Specifications
Amplifier |
|
Output power: | 4 x 6 W RMS power |
| acc. to DIN 45324/3.1 |
| or |
| 4 x 8 W max. power acc. |
| to DIN 45324/3.2 |
FM waveband |
|
Sensitivity: | 1,0 ∝V at 26 dB |
| |
Frequency |
|
response: | 35 - 16 000 Hz |
Tape player |
|
Frequency |
|
response: | 35 - 16 000 Hz |
Subject to modifications!
28
