KeyCard theft-protection system
DEUTSCH
This car radio is supplied with one KeyCard as standard.
However, the unit can also be operated with a second card.
If you have lost or damaged your KeyCard, you can buy a new one from your specialised dealer.
When using two KeyCards, you can indivi- dually store the following functions:
Bass, treble, balance and fader settings, assignments of preset buttons, Loudness, TA (traffic announcement volume), BEEP volume.
In addition to this, the settings activated be- fore switching the radio off, such as the waveband, station, TA priority, Loudness, AF, REG ON/OFF and seek tuning sensitivi- ty, will also remained stored.
This ensures that the basic settings you have programmed will automatically be activated as soon as you have inserted your KeyCard.
Putting the unit into operation
•Turn on the set and introduce the Key- Card into the slot with the contact area showing up (KeyCard tongue pulled out).
The car radio is now ready for operation.
If a wrong KeyCard is inserted, then “CARD ERR” will appear in the display. In this case please do not go on operating the set.
After approximately 10 seconds, the display | • Press the KeyCard in, which releases | |
will show “TURN OFF”. Now turn off the set. | the card and puts it in the proper positi- | |
When inserting a card of a different kind (like | on for being removed. | |
for example a credit card), the display will | • Remove the first KeyCard and insert | |
show “WRONG KC” for approximately 2 se- | ||
the new one while “CHANGE” is still | ||
conds. | ||
being displayed. | ||
Remove the wrong card and turn off the set. | ||
Now you can also use the new KeyCard for | ||
Do not make further adjustments until you | ||
operating your unit. | ||
have a correct KeyCard available. | ||
A maximum of two cards can be used per set. | ||
| ||
Removing the KeyCard | When trying to “define” a third one, the sy- | |
stem will automatically delete the access | ||
Never pull out the KeyCard directly. | authorisation of that KeyCard which was not | |
used for the “learning” process. | ||
• First press the KeyCard in. | ||
| ||
This releases the card and puts it in the | Displaying the radio pass data | |
proper position for being removed. | ||
| ||
• Now you can pull it out. | You can use the KeyCard supplied with the | |
| unit to display the individual radio pass data | |
“Defining” a second KeyCard/ | such as the model name, the type number | |
(7 6 ...) and the serial number: | ||
Replacing a KeyCard | ||
• Press and hold down preset buttons | ||
While operating the unit with the first Key- | ||
1 and 6 while switching on the unit. | ||
Card, you can “define” a second one to be | • Press the TS button within 2 seconds. | |
also used with the set: | The radio pass data will move through the | |
• Insert the first KeyCard and turn on the | ||
display several times. | ||
set. | ||
To quit the function: | ||
• Press the DSC button and select | ||
• Press any button. | ||
“LEARN KC” with / . | ||
| ||
The display will switch to “CHANGE”. |
|
ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
21
