For ALL Fences, Fence board | Delta 78-939 specs

FOR ALL FENCES

8. Using a 1/8” drill bit, drill two 1/8” pilot holes 1/2” deep at

the two marked locations on the back of cut-off fence board

(F) Figs. 5 and 6. NOTE: Mark the drill bit with masking

tape to act as a depth gage to prevent drilling through

fence board.

9. Align two holes (G) Fig. 6, with drilled holes (H) and

fasten cut-off fence support (C) to cut-off fence board (F)

using two #10 x 3/4” flat head screws (J).

10. Align hole (K) Fig. 7, in clamp and bracket assembly

(L) with the appropriate thru-hole (M) or (N) in cut-off fence

support (C) and fasten using the 1” long hex head bolt (P),

flat washer (R) and lockwasher (S). NOTE: Thru-hole (M)

Fig. 7, is used for Biesemeyer® commercial fences, or

fences which are approximately 4” wide, and thru-hole

(N) is used for Biesemeyer®home shop fences, or

fences that are approximately 3-1/2” wide. Also, bolt

(P) Fig. 7, is to be inserted from the bottom with the

flat washer (R) and lock nut (S) located on top.

CAUTION: Do not tighten lock nut (S) Fig. 7, completely, for clamp and bracket assembly (L) Fig. 8, needs to move freely.

11.Fig. 8 illustrates clamp and bracket assembly (L) properly fastened to cut-off fence support (C), for use with a Biesemeyer® commercial fence. Assembly to Biesemeyer® home shop-style fences is similar.

12.Thread knob (T) into threaded hole (W) of clamp and bracket assembly (L) approximately four complete turns.

13.Place entire cut-off fence assembly (X) Fig. 9, so it straddles the saw fence (D) as shown, and tighten knob

(T) until cut-off fence assembly (X) is firmly clamped to the saw fence (D). Then secure saw fence (D) in place by pushing down on handle (H).

14.Using a square (Y) Fig. 9, determine if cut-off fence board is 90 degrees to saw table. If an adjustment is necessary, loosen knob (T) slightly and turn adjustment screw (Z) accordingly. Then tighten knob (T) and recheck squareness. Repeat adjustment if necessary.

Fig. 6

	C
	K
L	M	N
L	M	P
		P
		R
		S

	Fig. 7

		S
		W


			T
C		L
C

		Fig. 8

			T
			T
D			X
			X

Y
Y	Z
	Z
F
		H

		Fig. 9

78-939 specifications

The Delta 78-939 is a state-of-the-art aircraft that embodies advanced engineering and cutting-edge technologies. Designed for both commercial and cargo operations, this aircraft has quickly gained a reputation for its reliability, efficiency, and versatility.

One of the main features of the Delta 78-939 is its optimized aerodynamic design, which allows for reduced drag and enhanced fuel efficiency. Its sleek fuselage, combined with efficient wing designs, ensures that the aircraft can travel longer distances with less fuel consumption. This makes it an ideal choice for airlines looking to minimize operational costs while maximizing profitability.

The Delta 78-939 is powered by high-performance turbofan engines that provide excellent thrust-to-weight ratios. These engines not only enhance performance during takeoff and ascent but also contribute to lower fuel burn during cruise, making the aircraft more environmentally friendly. The engines are equipped with advanced noise-reduction technologies, helping to meet stringent international noise regulations and ensure a quieter experience for those on the ground.

In terms of passenger comfort, the cabin of the Delta 78-939 stands out with its modern layout and amenities. It features spacious seating configurations that can easily be adapted for various service classes. The cabin is designed with sound insulation materials that reduce cabin noise, creating a tranquil environment for passengers. Additionally, the aircraft is equipped with the latest in-flight entertainment systems, offering passengers a variety of viewing options during their journey.

The Delta 78-939 also incorporates advanced avionics and navigation systems, providing pilots with real-time information and enhanced situational awareness. The glass cockpit technology features intuitive interfaces that streamline operations, allowing for improved communication and coordination among flight crew and air traffic control.

Safety is a paramount concern in aviation, and the Delta 78-939 is no exception. It is equipped with multiple redundancy systems, ensuring that critical components remain operational even in the event of a failure. Advanced weather radar and collision avoidance systems further enhance operational safety.

Overall, the Delta 78-939 is a remarkable aircraft that combines performance, comfort, and technology in one efficient package. Its design and features cater to the evolving needs of the aviation industry, making it an attractive option for airlines and operators worldwide. As the aviation sector continues to advance, the Delta 78-939 is poised to play a significant role in shaping the future of air travel.