Delta 78-939 manual Assembly, For Brands Other than Biesemeyer

Page 2

ASSEMBLY

DISCONNECT SAW FROM POWER SOURCE UNTIL ALL ASSEMBLY AND SET-UP PROCEDURES HAVE BEEN COMPLETED.

FOR BIESEMEYER® COMMERCIAL OR HOME SHOP FENCES ONLY.

1.Fold template (A) Fig. 2, on fold line and align the template with the bottom of fence board (B). Using a punch, mark the fence board (B) as indicated on the template (A) for Commercial or Home Shop installation. Then proceed to section “FOR ALL FENCES” STEP 8.

FOR BRANDS OTHER THAN BIESEMEYER

2.Place cut-off support (C) Fig. 3, onto saw fence (D) as shown.

3.Place a straight edge (E) Fig. 3, approximately 1/16”- 1/8” thick, onto saw table as shown. Then, place cut-off fence board (F) Figs. 3 and 4, vertically onto straight edge (E) and against saw fence (D) with the unfinished edge down as shown in fig. 4.

4.Hold cut-off fence board (F) Fig. 4, Firmly against cut-off fence support (C), and draw a line across the rear of cut-off fence board (F) as shown.

5.Remove cut-off fence board (F) Fig. 4, and cut-off fence support (C) from saw fence (D), and place cut-off fence board onto a flat, supporting surface with pencil marks facing up as shown in Fig. 5.

6.Align the top of cut-off fence support (C) Fig. 5, with the pencil line on cut-off fence board (F) and center cut-off fence support (C) onto board.

7.Using a pencil, mark the back of cut-off fence board (F) Fig. 5, through the two holes (G) in cut-off fence support

(C).

A

B

Fig. 2

D

E

 

 

C

 

 

F

 

 

 

 

 

Fig. 3

 

 

 

D

C

F

 

 

 

 

 

 

 

E

Fig. 4

C

GF

Fig. 5

2

Image 2
Contents Biesemeyer Model no -939 CUT-OFF Fence Assembly For Brands Other than BiesemeyerFor ALL Fences Fence boardDisconnect SAW from Power Source SET-UP and USEPart Number Description Replacement PartsCUT-OFF Fence PARTS, Service or Warranty Assistance Phone Toll Free 731 800Hole Drilling Template for Biesemeyer Cut-Off Fence Model This page Intentionally Left BLANK\

78-939 specifications

The Delta 78-939 is a state-of-the-art aircraft that embodies advanced engineering and cutting-edge technologies. Designed for both commercial and cargo operations, this aircraft has quickly gained a reputation for its reliability, efficiency, and versatility.

One of the main features of the Delta 78-939 is its optimized aerodynamic design, which allows for reduced drag and enhanced fuel efficiency. Its sleek fuselage, combined with efficient wing designs, ensures that the aircraft can travel longer distances with less fuel consumption. This makes it an ideal choice for airlines looking to minimize operational costs while maximizing profitability.

The Delta 78-939 is powered by high-performance turbofan engines that provide excellent thrust-to-weight ratios. These engines not only enhance performance during takeoff and ascent but also contribute to lower fuel burn during cruise, making the aircraft more environmentally friendly. The engines are equipped with advanced noise-reduction technologies, helping to meet stringent international noise regulations and ensure a quieter experience for those on the ground.

In terms of passenger comfort, the cabin of the Delta 78-939 stands out with its modern layout and amenities. It features spacious seating configurations that can easily be adapted for various service classes. The cabin is designed with sound insulation materials that reduce cabin noise, creating a tranquil environment for passengers. Additionally, the aircraft is equipped with the latest in-flight entertainment systems, offering passengers a variety of viewing options during their journey.

The Delta 78-939 also incorporates advanced avionics and navigation systems, providing pilots with real-time information and enhanced situational awareness. The glass cockpit technology features intuitive interfaces that streamline operations, allowing for improved communication and coordination among flight crew and air traffic control.

Safety is a paramount concern in aviation, and the Delta 78-939 is no exception. It is equipped with multiple redundancy systems, ensuring that critical components remain operational even in the event of a failure. Advanced weather radar and collision avoidance systems further enhance operational safety.

Overall, the Delta 78-939 is a remarkable aircraft that combines performance, comfort, and technology in one efficient package. Its design and features cater to the evolving needs of the aviation industry, making it an attractive option for airlines and operators worldwide. As the aviation sector continues to advance, the Delta 78-939 is poised to play a significant role in shaping the future of air travel.