Casablanca Fan Company 59062, 59060 Standard Mounting Angled, To hang the fan from a flat ceiling

Page 4

34O CEILING

If you have a flat ceiling:

OPTION

Mounting Options www.CasablancaFanCo.com 1.888.227.2178

WALL

Hang your fan by a standard downrod (included).

If you have an angled ceiling:

1.You will need a longer downrod (sold separately).

2.If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit (sold separately).

Standard

 

Mounting

1

 

Angled

OPTION

Mounting

2

 

Support

 

Structure

 

Standard

Ceiling

Mounting

Outlet Box

Style

(required)

Support

Structure

Ceiling

Outlet Box

(required)

Angled

Mounting

Style

Use the three steps below to determine if your ceiling angle is greater than 34°

123

34°

FOLD PLACE SLIDE

on dotted lineagainst walltoward ceiling

Guide Touches

 

Guide Touches Wall

BOTH Ceiling & Wall

 

but NOT Ceiling

 

 

 

Use Standard Mounting

to hang the fan from a flat ceiling.

Use Angled Mounting

to hang the fan from a

UA T I

S

T

 

1

 

N

O

I

 

You need ONLY a Longer Downrod

*most common

UA T I

S

T

 

2

 

N

O

I

 

You need BOTH a Longer Downrod & an Angled Mounting Kit

vaulted or angled ceiling.

4

M8505-01 • 10/30/14 • © Casablanca Fan Company

Image 4
Contents Table of Contents What to Expect with Your Installation Tools Needed Standard Mounting Angled Support Structure Standard Ceiling MountingTo hang the fan from a flat ceiling To hang the fan from aMake sure all four bumpers are Still attached Ceiling BracketFor angled ceilings, point Opening toward peak Preparation Remove the shipping blocks from Motor. Discard the screwsDownrod For angledCeilings or HigherTighten the setscrew Leave at least 8 extendingFrom the top DownrodFlush against the motor housing Through the canopy. Let Align the screw holes on the adapterDownrod ball into the slot Cover with the screw holes on FanWiring Assembly as shownUsing an orange wire connector from Or commonBefore Wall ControlAfter Canopy HolesBlades Attached, insert the blade iron intoFeed the wires from the bottom Light KitFan to the white wire from the light kit Tuck the wires into the light kit, then liftFound Hardware bag Finial Finial CapBattery Holder Door OperationReverse Button Fan Speed Low HighMaintenance & Cleaning OFFTroubleshooting Fan doesn’t work