Casablanca Fan Company 55035, 55036 operation manual Canopy, Holes

Page 13

Canopy

www.CasablancaFanCo.com

1.888.227.2178

Position the canopy so that, when lifted into place, the canopy fits into the hanging bracket as shown.

Screw

Holes

Lift the canopy into place so that

the screw holes are aligned.

Insert the two canopy screws found in thehardware bag.

13

Note: Fan style may vary.

M8503-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company

Image 13

Contents Table of Contents What to Expect with Your Installation Tools Needed Mounting Options For angled ceilings, point Opening toward peak Ceiling BracketPreparation Downrod Hand Tighten Do not Pick the FAN UP by Put the wires and downrod through the canopyAssembly as shown WiringOM F Using the orange wire connectors from the hardware bagBefore Wall ControlAfter Holes CanopyEach blade between a blade iron Motor with screws foundHardware bag, to attach the medallion Switch Housing Hardware bag Operation Battery Holder DoorLow High Battery Door Maintenance & CleaningFan doesn’t work TroubleshootingUnpairing Procedure for Faulty Operation of Remote Controls