Casablanca Fan Company 55035 Ceiling Bracket, For angled ceilings, point Opening toward peak

Page 5

Ceiling Bracket

www.CasablancaFanCo.com

1.888.227.2178

OFF

For angled ceilings, point

opening toward peak.

Use wood screws

Use machine screws

(included) when securing

(provided with outlet

to support structure with

box) when securing to

approved electrical outlet

existing ceiling fan-rated

box. Drill 9/64” pilot holes

outlet box. Make sure

in support structure to aid

it is securely installed

in securing ceiling bracket

and is acceptable for fan

with hardware found in

support of 31.8 kg (70 lbs)

the hardware bag.

or less.

Make sure all four bumpers are

If you are unable to do this,

still attached.

call Technical Support at

 

1-888-277-2178.

Refer to warning w.1 on pg. 2

 

5

To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box associated with the wall switch location.

M8503-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company

Image 5
Contents Table of Contents What to Expect with Your Installation Tools Needed Mounting Options For angled ceilings, point Opening toward peak Ceiling BracketPreparation Downrod Hand Tighten Do not Pick the FAN UP by Put the wires and downrod through the canopyAssembly as shown WiringOM F Using the orange wire connectors from the hardware bagAfter Wall ControlBefore Holes CanopyHardware bag, to attach the medallion Motor with screws foundEach blade between a blade iron Switch Housing Hardware bag Low High Battery Holder DoorOperation Battery Door Maintenance & CleaningFan doesn’t work TroubleshootingUnpairing Procedure for Faulty Operation of Remote Controls