DeLonghi TCH 7590-8590 manual Maintenance, Hour Digital Timer, Using the Remote Control

Page 6

7. To turn off the appliance press button (A) and remove the plug from the outlet.

24-HOUR DIGITAL TIMER

This function can be activated from any operating mode.

NOTE: The display can show the temperature in both °F and °C. To select, press and hold the + key for at least 5 seconds, then release.

Delayed switch-on: With the appliance STAND-BY, press the timer button (F) ( ).

The display shows the symbol ( ) and the time remaining before switch-on. To set the timer, use the + and - adjustment buttons (B), then wait a few seconds for the programming to be set.

The display returns to showing “--” for stand-by and the symbol ( ) to indicate you have set the timer. When the programmed time has been reached, the appliance turns on with the same settings it had

during the previous operation.

Delayed shut-off: With the appliance on, press the timer button (F) ( ). The display shows the symbol ( ) and the time remaining before shut-off.

To set the timer, use the + and - adjustment buttons (B), then wait a few seconds for the programming

to be set. The display returns to showing the current settings and the symbol ( ) to indicate you have set the timer. When the programmed time as been reached the appliance shuts off automatical- ly. If you want to go back to operation without the timer, press the timer button (F) twice.

The timer symbol ( ) disappears from the display.

USING THE REMOTE CONTROL

The remote control functions correspond to those on the control panel. See the section “Opera- tion and Use" on the previous page. for a description of the functions.

INSERTING OR REPLACING THE BATTERIES

Remove the cover on the rear of the remote control;

Insert two AAA (R03/1.5V) batteries (included but packaged separately) making sure they are in the correct position (see the instructions inside the battery compartment);

Replace the cover.

Old batteries must be removed and disposed of in accordance with current legislation as they are harmful to the environment.

MAINTENANCE

-Before carrying out any maintenance, always remove the plug from the power outlet.

-During the season when the appliance is being used, regularly clean the air intake and outlet grilles using a vacuum cleaner.

-Never use abrasive powders or solvents to clean the appliance.

-Remove the back grille by pulling it outward (Fig. 1).

Remove the dust filter that filters impurities from the air taken in from the room, blow it ligh- tly, then reposition it in the appliance.

WARNINGS

-Never use this heating appliance in the immediate vicinity of a bathtub, shower, or swimming pool.

-Use the appliance always and only in the vertical position.

-Do not use the appliance to dry laundry, and do not obstruct the air intake and outlet grilles (danger of overheating).

-Do not operate the appliance in contact with walls, furniture, curtains, etc.

-If the power cord is damaged, it must be replaced by the manufacturer, the authorized service facility, or a qualified electrician, in order to prevent the risk of malfunction.

-Do not cover the appliance while it is operating, as this could potentially cause a fire.

-Do not use this appliance in a room smaller than 43 square feet (4 m²).

-Heaters should never be used with an extension cord or outlet strip. Heaters should be plugged directly into an outlet.

6

Image 6
Contents LEA Cuidadosamente Este Instructivo Antes DE Usar MODEL/MODELE/MODELO/MODELLODescription DE L’APPAREIL DescriptionDescripción DEL Aparato Descrizione DELL’APPARECCHIOPage Important Instructions Tools Needed and Estimated Time InstallationAssembling the Appliance Electrical ConnectionMaintenance Hour Digital TimerUsing the Remote Control TROUBLE-SHOOTING Limited Warranty