Introduction, Features, Model Variations | Shure WH30 specification

INTRODUCTION

The Shure Model WH30 is a light yet rugged headset microphone. Designed for vocalists and instrument-playing vocalists, the WH30 utilizes a high quality electret-condenser car- tridge suitable for all applications where mobility, comfort, low microphone-visibility, and high sound quality are required. Because of its cardioid (unidirectional) pickup pattern, the WH30 provides isolation from extraneous sound sources and high gain-before-feedback.

The wireframe and gooseneck adjust to any head size and shape. An integrated elastic headband comfortably pads and secures the headset. The WH30 is supplied with two snap-on windscreens, clothing clip, storage bag and cable-management device.

FEATURES

•Smooth, natural frequency response comparable to professional condenser hand-held microphones

•Lightweight wireframe and headband adjust for a secure, comfortable fit

•Extra-strong, small-diameter microphone cable resists breakage

•Moisture-proof cartridge housing

•Sturdy gooseneck-boom holds mic securely in place

•lsolation shock mount for reduced handling noise

•Matte black finish for low visibility

•High input clipping level helps avoid overload distortion

•Low self-noise and high sound pressure level capability

•Reliable at temperature and humidity extremes

MODEL VARIATIONS

•WH30TQG: For wireless use, the WH30TQG has a 1.2m (4 ft.) high-flex cable and a mini TA4F connector for direct connection to Shure body pack transmitters.

Note: For information about use with Shure W10BT or other transmitters without a mini TA4F connector, contact Shure Customer Service).

•WH30XLR: For wired applications, the WH30XLR is supplied with a 1.2m (4 ft.) hi-flex cable and high quality mic preamplifier (RPM420) with a three pin XLR con- nector. The RPM420 preamplifier requires phantom power from any 11 - 52 V source.