Little Touch & Sew 67A
Replacing the Machine
When you have finished sewing, you can leave the machine in place, or you can put it away and have a handy table for other uses.
1.Remove the machine and set it aside.
2.Lift out the panel, pulling it gently straight up. Set the panel aside.
3.Place the machine face down in the well. Make sure the ridge on the machine slides into groove 2 on both sides.
4.Grasp the long side of the panel and slide the small side into groove 1 at both sides of the back of the table.
Table of Contents | Previous Page Next Page |
11