Singer 67A instruction manual Adapter

Page 24

Little Touch & Sew 67A

The Adapter

The electrical adapter converts your Little Touch & Sew machine from battery or hand power** to regular household electric power. You can buy one at your local SINGER CENTER.

The adapter is safe and easy to use. Just fol- low these few simple steps:

1.Make sure the ON-OFF switch is at OFF.

2.Insert the small plug that is on one end of the adapter cord into the hole in the right side of machine.

3.Insert the large plug into any regular wall outlet.

4.Turn the ON-OFF switch to ON.

5.Operate your sewing machine just as if you were using battery power.

**Regular household current is 110-120 volts AC 60 cycle.

Table of Contents

Previous Page Next Page

24

Image 24
Contents Touch & Sew Table of Contents Message To the young seamstressMessage To Mother Little Touch & Sew 67A Little Touch & Sew 67A Little Touch & Sew 67A Little Touch & Sew 67A Little Touch & Sew 67A Assembling the Sewing Table Setting Up Your Sewing Machine Replacing the Machine Name For Everything Job For Everything How to wind the Bobbin Little Touch & Sew 67A How to replace the Bobbin How to thread the Needle How to change the Needle How to adjust tension Tension DialHow to sew a seam How to begin How to place your fabric How to start stitching How to end a seam Adapter Here are the presents that Stephanie made for her family Coat for McGurk Hankie holder for Father Stocking holder for Mother Apron for Grandmother Nightie for Carolyn Scarf for Barbara Little Touch & Sew 67A