Overvi Ew

This unit uses Bluetooth technology that allows wireless communications on devices such as cellular phones. This is designed to be a totally wireless hands-free car kit or a stand-alone wireless headset. This provides the user to operate a cellular phone inside the car while driving and can also be used anywhere by detaching the earpiece and becomes a stand-alone Bluetooth headset. The unit will work

on all Bluetooth cellular phones provided that they respect the Bluetooth protocol.

A. I LLUSTRATI ON S

1– Magnet

2– Charging Pins

3– Charge/Power Indicator

4– Line Pick-up Button

5– Cigarette Lighter Plug

6– Main Speaker

7– Ear Hook

8– Multi-function Button (Talk/Power/Volume)

9– Microphone / Indicator lights

10– Speaker Volume

11– Earphone

B. TURN I N G ON / OFF TH E UN I T

There are two ways to turn ON/OFF the unit depending on how it is being used. When used as a hands-free car kit, plugging it in the cigarette lighter plug (5) activates the unit. When used as headset, follow the steps below:

1.Press the multi-function button for 2 seconds. A low-high tone will then be heard and a blue light will show.

2.Release the button and the indicator light will blink. The headset is now ready and is waiting for a call (standby mode). (Note: If the indicator becomes red, it means that the battery on the headset is low. Re-charge it immediately by putting it back to the main unit.)

3.Turn the headset OFF by pressing the multi-function button for more than 4 seconds or more depending on the phone. A high-low tone will then be heard and the indicator light becomes red then turns off after a few seconds.

4.Wait at least 4 seconds before turning the headset ON again.

REMARK:

When the cell phone is not detected for more than 5 minutes, if used as a stand-alone headset or docked and no power from the Cigarette lighter plug, it will turn off automatically to conserve battery life.