Operating Instructions, FAN Stand | Black & Decker BDHV3016 specs

WARNING: This appliance has a polarized plug (one blade on the plug is wider than the other). To reduce the risk of electric shock, only use a polarized plug in a polarized outlet. If the plug does not fit easily into the outlet, turn the plug over so the right part of the plug fits in the outlet's other slot. If the plug still does not fit, contact a qualified electrician. Do not modify the plug in any way.

USER SERVICING INSTRUCTIONS

1.Remove the plug from the receptacle or other outlet device. Do not unplug by pulling on the cord.

2.Use a suitable tool such as a small flat screwdriver or travel scissors.

3.When opening the fuse cover, slide-open the fuse access cover on top of the attachment plug towards the blades. (See Fig.1)

4.Carefully remove the fuse by prying it out. (See Fig.2)

5.A fire can result from using the wrong fuse rating. Only replace fuses with a 2.5 Amp, 125 Volt rating fuse. (replacement fuses are not included）

6.To close the fuse access cover, slide the fuse access cover on top of the attachment plug. (see Fig.3)

Fig.1Fig.2Fig.3

7.Do not replace the attachment plug because it contains a safety device (fuse) that should not be removed. Discard this product if the attachment plug is damaged.

OPERATING INSTRUCTIONS

WARNING: Do not attach the fan to a window or place the fan near a window, as the risk of electrical shock exists and can cause serious personal injury and/or property damage.

1.Place the fan on a level surface that is completely dry.

2.Make sure the rotary switch is at the “0” (OFF) position.

3.Plug the unit into a 120V AC 60Hz outlet.

4.Adjust the fan head vertically to your desired angle.

5.To run the unit, turn the rotary switch to the “1” (Low), “2” (Medium) or “3” (High) position.

6.To turn the unit off, turn the rotary switch to the “0” (OFF) position.

7.Unplug the unit from the electrical outlet when it's not in use or is left unattended.

DIAGRAM

ASSEMBLY INSTRUCTIONS

1.Position the Rear Guard (5) over the front motor cover (7) and align the notches in the grill with the corresponding features on the motor housing. Secure the rear grill in position with the Locking Nut (4)..

2.Place the fan blade (2) on the shaft making sure that the screw (3) is aligned over the flat portion of the Motor Shaft(6). With the screw over the flat portion, tighten the screw (3) to secure the fan blade to the shaft. Make sure that the screw is fully tightened to prevent the fan blade from slipping on the shaft.

3.With fan head in upright position, align Black & Decker logo of front grill so it is horizontal and right side up. By starting with the top of the grill and working down push the guard rings in place, so that it holds both guards together.

FAN STAND

1.Attach the coupling (15) to the base (18) by securely tighten the four screws onto the base.

2.Adjust the fan height with the Knob (14) on the Coupling Tube.

3.Position the fan onto the inner stand pipe (13) and tighten in place using screw (12). Ensure that the screw is fully tightened.

FAN TABLE

1.Use a screw (19) and a nut to place the fan head into the pipe stand (19).

BDHV3016 specifications

The Black & Decker BDHV3016 is a compact and powerful handheld vacuum designed to meet the demands of modern cleaning. Ideal for quick clean-ups around the home, this device emphasizes convenience, performance, and user-friendly features.

One of the standout features of the BDHV3016 is its impressive suction power. Equipped with a 16V lithium-ion battery, it delivers strong performance, allowing users to tackle dirt, debris, and pet hair with ease. The cordless design enhances mobility, enabling users to reach tight corners and high places without the hassle of cords.

The BDHV3016 incorporates a transparent, easy-to-empty dustbin with a capacity that is sufficient for a variety of small tasks. This feature eliminates the frustration of dealing with dust bags and makes maintenance straightforward. Users can simply detach the bin, empty it, and snap it back into place, ensuring a quick transition from cleaning to storage.

Another notable characteristic is the inclusion of a variety of attachments that enhance the versatility of the vacuum. The crevice tool helps to access narrow spaces, while the brush attachment is perfect for upholstery and delicate surfaces. This adaptability makes the BDHV3016 suitable for cleaning cars, furniture, and stairs.

In terms of technology, the BDHV3016 boasts Smart Charge technology that optimizes charging to reduce energy consumption. With a fast charging time of roughly four hours, the vacuum is ready to go when you are, ensuring that it won't sit idle for long.

The design of the BDHV3016 is also user-centric, featuring an ergonomic handle that provides comfort during prolonged usage. The lightweight nature of the vacuum makes it easy to carry around the house without causing strain.

Overall, the Black & Decker BDHV3016 combines solid performance with a user-friendly interface, making it an excellent choice for those in need of a reliable and efficient handheld vacuum. With its powerful suction, versatile attachments, and convenient charging technology, it stands out in the crowded market of cleaning devices, appealing to both everyday users and cleaning enthusiasts alike.