Canister Vacuum
Item # XDB520H
for Models CV520HR/HB/HY
25 Paper Bags
Warning: To reduce the risk of electric shock, the power cord must be disconnected before changing the bag or performing maintenance/trouble shooting checks.
Changing the Dust Bag:
1.Unplug power cord from wall outlet.
2.Open the dust bag compartment, lift up the cover locking tab. (Fig. 1)
3.Pull dust bag retaining clip forward. Remove the dust bag from the dust bag compartment by pulling up the cardboard section. Dispose of paper bags. Never reuse paper bags.
4.Insert a new dust bag back into the dust bag support guide inside the bottom of the dust bag compartment making sure that the dust bag rubber seal is aligned correctly against the air intake hole on the unit. (Fig. 1) When inserting the new dust bag, make sure that the arrow on the bag is pointing down. (Fig. 2)
5.Release the dust bag retaining clip, ensuring that the dust bag is held in place.
Retaining | Fig. 1 | Fig. 2 |
Clip |
|
|
Lift Up
Caution: Make sure that the cardboard section of the dust bag is firmly in place inside the dust bag support.
Caution: The dust bag compartment will not close if the dust bag is not inserted properly into the unit. Never use the vacuum without a dust bag inserted into the unit. NEVER reuse the paper dust bags.
NEVER REUSE PAPER BAGS
Rev. 03/05A | |
94 Main Mill Street, Door 16 | |
Plattsburgh, NY 12901 | Printed in China |
Tel.: 1 (800) |
|
Canister Vacuum
Item # XDB520H
for Models CV520HR/HB/HY
25 Paper Bags
Warning: To reduce the risk of electric shock, the power cord must be disconnected before changing the bag or performing maintenance/trouble shooting checks.
Changing the Dust Bag:
1.Unplug power cord from wall outlet.
2.Open the dust bag compartment, lift up the cover locking tab. (Fig. 1)
3.Pull dust bag retaining clip forward. Remove the dust bag from the dust bag compartment by pulling up the cardboard section. Dispose of paper bags. Never reuse paper bags.
4.Insert a new dust bag back into the dust bag support guide inside the bottom of the dust bag compartment making sure that the dust bag rubber seal is aligned correctly against the air intake hole on the unit. (Fig. 1) When inserting the new dust bag, make sure that the arrow on the bag is pointing down. (Fig. 2)
5.Release the dust bag retaining clip, ensuring that the dust bag is held in place.
Retaining | Fig. 1 | Fig. 2 |
Clip |
|
|
Lift Up
Caution: Make sure that the cardboard section of the dust bag is firmly in place inside the dust bag support.
Caution: The dust bag compartment will not close if the dust bag is not inserted properly into the unit. Never use the vacuum without a dust bag inserted into the unit. NEVER reuse the paper dust bags.
NEVER REUSE PAPER BAGS
Rev. 03/05A | |
94 Main Mill Street, Door 16 | |
Plattsburgh, NY 12901 | Printed in China |
Tel.: 1 (800) |
|