Eureka SP5816 warranty Routine Maintenance, Periodic Maintenance

Page 7

ROUTINE MAINTENANCE (continued)

or

Filter

Pre-Motor Filter

Check the pre-motor fi lter each time the dust bag is changed. Clean or replace as needed.

To Clean Pre-Motor Filter

1.Remove fi lter screen and fi lter centered in the bottom of the bag compartment.

2.Shake fi lter to remove excess dust. If necessary, the fi lter can be cleaned by vacuuming with another cleaner or washing with mild detergent.

3.Reinstall fi lter after completely dry, and replace fi lter screen.

Use GENUINE EUREKA replacement pre-motor filter, Part No. 71480.

Cartridge Filter (Only cartridge style fi lters can be used with this model.)

Check the True HEPA fi lter each time dust bag is changed. Replace twice a year or as needed.

True HEPA Cartridge

Latch

Filter Door Latch

To remove True HEPA cartridge filter

1.Push down on fi lter door latch and pull door away from cleaner.

2.Push down on HEPA cartridge latch and remove fi lter.

To replace True HEPA cartridge filter

1. Place bottom tabs of fi lter cartridge into slots. Rotate

fi lter toward cleaner, press fi rmly against cleaner to latch.

Make sure True HEPA cartridge latch is secured on both sides.

2.Replace fi lter door by placing tabs of door into slots on cleaner. Rotate door up and against cleaner until it locks into place.

NOTE: To have the benefit of a sealed True HEPA system, you must use one of the True HEPA cartridge filter systems.

Use GENUINE EUREKA replacement True HEPA filter, HF5, 61830A.

How To Clean Filters

1.Remove from cleaner.

2.To remove debris, tap fi lter against waste container or brush off. You may also vacuum the fi lter using a different cleaner, if fi lter needs further cleaning, wash under warm running water.

3.When all parts are completely dry, follow the above steps in reverse to reassemble.

NOTE: Do not put any parts in a dishwasher.

NOTE: Your washable filter may need to be replaced if cleaning it does not restore cleaning performance.

Be sure to use GENUINE EUREKA replacement filters.

PERIODIC MAINTENANCE

How To Change Light Bulb

(Only for models with a headlight)

NOTE: Turn off the power switch and disconnect the electrical cord before changing light bulb.

1.Lower handle. Remove the screw from lens cover.

2.Pull lens cover from cleaner.

3.Pull old light bulb out of socket.

4. Push new light bulb into sockeet.

5. Replace lens cover.

6. Secure with screw.

Use GENUINE EUREKA replacement light bulb, Part No. 57940-2.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Index Please RetainEn Mexico llame al USA 1-800-800-8975 Mexico Canada Service InformationGeneral Information Thermal Cut OffDusting/Upholstery Brush Storage. Store the dusting Quick ReferenceHelpful Information HeadlightAttach Hose HOW to AssembleStore Hose and Accessories Attach HandleNested Extension Wands to add reach HOW to USERemoving the Dust Bag Style LS Routine MaintenanceInstalling New Dust Bag Reinstalling the Dust Bag CoverPeriodic Maintenance Routine MaintenanceBrush Roll Belt Periodic MaintenanceHow To Replace Brush Roll Belt Brush RollTo Clear Blockages in Hose Problem SolvingLower Hose Adapter Nested Wands Base Upper Hose Tabs Sanitaire Limited Warranty

SP5816 specifications

The Eureka SP5816 is a sophisticated and highly efficient cleaning solution designed to meet the demands of modern households and commercial spaces alike. Featuring a sleek and ergonomic design, this vacuum cleaner boasts several advanced technologies that enhance its functionality and ease of use, making it stand out in a crowded market.

At the core of the Eureka SP5816 is its powerful motor, which provides strong suction capabilities for effective dirt and debris removal. Whether tackling deep-pile carpets or hard surfaces, the SP5816 ensures that every corner of your home is left spotless. The vacuum is equipped with multiple cleaning modes, allowing users to easily switch between different floor types, maximizing cleaning performance on carpets, hardwood floors, and tiles.

One of the key features of the Eureka SP5816 is its lightweight design. Weighing in at just a fraction of traditional vacuums, it allows users to navigate and carry it with ease, reducing fatigue during cleaning sessions. Its compact size also makes it easy to store, fitting conveniently into small spaces.

The Eureka SP5816 integrates advanced filtration technology that captures 99.7% of dust, allergens, and particles as small as 0.3 microns. This HEPA filtration system is particularly beneficial for allergy sufferers, as it helps to improve air quality by trapping harmful substances within the vacuum, preventing them from being released back into the environment.

Another noteworthy characteristic of the Eureka SP5816 is its user-friendly features. The vacuum comes with a variety of attachments, including crevice tools, dusting brushes, and upholstery nozzles, making it versatile for detailed cleaning tasks. Additionally, it features an easy-to-empty dust cup, which minimizes mess and simplifies the process of disposing of collected debris.

Its innovative design is completed with a long power cord that allows for extended reach without the need for constant re-plugging. The Eureka SP5816 also incorporates noise-reduction technology, ensuring that cleaning can be accomplished without disturbing the peace of the home.

In conclusion, the Eureka SP5816 represents a blend of power, efficiency, and versatility. With its cutting-edge technologies, effective filtration system, and lightweight design, it serves as an ideal partner for anyone looking to maintain a clean and healthy environment. Whether for home use or light commercial tasks, the SP5816 proves to be a reliable and effective cleaning solution.
Top Page Image Contents