Intelli-Sense Filter MonitorTM, Motor Thermostat

Wash once a month or when suction appears reduced.

Warning: Allow 24 hours for drying before replacing in unit.

Fig. A

PRECAUTIONARY MEASURES

OPERATING INSTRUCTIONS

Important: If the suction opening in the unit, the hose or the extension tubes become blocked, switch off the vacuum cleaner and remove the blocking substance before you start the unit again.

1. Do not operate the vacuum	5. When pulling out the power plug
cleaner to close too heaters,	from the wall outlet, pull the plug
or radiators.	not the power cord.

5.Vigorously “TapClean” the HEPA Dust Cup Filter on a hard surface until no more dust is observed falling out from between the pleats of the filter.

6.“TapClean” the Debris Screen or rinse under a faucet until clean.

Remember that the Debris Screen must be completely air dried for

24 hours before	Debris
reinstalling in the vacuum.	Screen

7. To re-assemble the HEPA filter

CAUTION: The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will overheat and could become damaged.

Intelli-Sense Filter MonitorTM

When the Intelli-Sense Filter MonitorTM lights up, it means that the dust cup is full or filter needs cleaning. You must empty the dust from the dust cup and clean the HEPA dust cup filter right away.

Changing & Cleaning the Exhaust Filter

The exhaust filter is a washable filter but should be replaced every three (3) months depending on usage.

2.Before inserting the power plug into the wall outlet, make sure that your hands are dry.

3.Do not vacuum any liquids.

4.Keep hair, loose clothing, fingers, feet and all parts of body away from openings.

6.Do not pick up anything that is burning or smoking such as cigarettes, matches or hot ashes.

7.Do not use without dust cup filter or exhaust filter in place.

8.Before you start vacuuming, make sure to remove large or sharp objects that might damage the vacuum.

assembly, first insert the HEPA

filter onto the dust cup cover

making sure to push it all the way

in. Then insert the debris screen

again making sure that it is pushed

all the way up against the dust cup

cover.

8. When replacing the dust cup cover

with the HEPA filter assembly

into the dust cup, make sure that

the tab on the

dust cup cover

is fully aligned

with the tab

indentation on

the dust cup

handle otherwise

the seal will not

be complete

and the unit will not

function properly.

PLEASE NOTE: The white pleated filter material in the HEPA Dust Cup Filter will discolor over time -This is NORMAL and will NOT affect the performance of the filter. If the HEPA Dust Cup Filter is

properly "TapCleaned” after each use and suction does not return to 100%, then we suggest that the HEPA filter be “TapCleaned” vigorously until no more dust can be

removed, then rinsed under the faucet and allowed to air dry for 24 hours before refitting into the vacuum. (Fig.

A)Wash once a month or when suction appears reduced.

1.Remove the exhaust filter cover from the rear of the unit.

2.Rinse the exhaust filter in lukewarm water and dry the filter completely. Do not use a washing machine to rinse the filter. Do not use a hair dryer to dry it. Air dry ONLY for 24 hours. Never operate the vacuum without the exhaust filter in place.

3.When the filter is dry, replace

into the unit and replace the exhaust filter cover over it.

4.A severely soiled or clogged filter should be thoroughly washed with fresh tepid water. A mild detergent can be used if required.

Motor Thermostat

IMPORTANT: This unit is equipped with a motor protective thermostat. If for some reason the vacuum cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur:

•	Push the On/Off button once.
•	Disconnect the plug from the power
•	source.
•	Check the source of overheating
	problem. (i.e. clogged hose or filter)
• If clogged hose or filter is found, unclog
•	the hose and replace the filter.
•	Wait at least 45 minutes before
•	attempting to reuse the vacuum.
•	After unit has cooled down for 45
	minutes, plug in the cleaner and push
	the On/Off button. The vacuum should
	start again.
• If the vacuum still does not start,
	contact customer service at
	1 (800) 798-7398.

HV118 specifications

The Euro-Pro HV118 vacuum cleaner is a versatile and efficient cleaning device designed to tackle a variety of surfaces and environments. Known for its powerful suction capabilities and user-friendly features, this model stands out in the crowded vacuum cleaner market.

One of the main features of the Euro-Pro HV118 is its high-performance motor, which delivers robust suction power to effectively lift dirt and debris from carpets, hardwood floors, and upholstery. This makes it an ideal choice for homes with pets or heavy foot traffic, as it can capture even the tiniest particles that ordinary vacuums might miss. The vacuum also incorporates multi-surface cleaning technology, allowing users to easily switch between different floor types without needing to change attachments.

The HV118 is equipped with a lightweight design, making it easy to maneuver around the home. Weighing in at a manageable size, it can be carried upstairs or moved from room to room with minimal effort. Its ergonomic handle adds to its usability, ensuring that prolonged cleaning sessions are comfortable.

Another key characteristic of the Euro-Pro HV118 is its advanced filtration system. The vacuum features HEPA filtration, which traps allergens and dust particles, improving indoor air quality. This technology is particularly beneficial for allergy sufferers, ensuring a cleaner and healthier living environment.

The Euro-Pro HV118 also boasts a bagless design, which eliminates the need for disposable bags, making it a more eco-friendly option. Instead, it utilizes a clear dirt container that can easily be emptied and cleaned. This feature not only saves money on ongoing maintenance costs but also allows users to see when the container is full, ensuring optimal performance at all times.

For added convenience, the HV118 includes a range of attachments designed to enhance its functionality. These may include a crevice tool for hard-to-reach areas, upholstery brushes for furniture cleaning, and other specialized nozzles for various surfaces. The vacuum is also designed with a cord rewind feature, allowing for easy storage and tidiness when not in use.

In summary, the Euro-Pro HV118 vacuum cleaner combines powerful suction, advanced filtration, and versatile cleaning options, making it an excellent choice for households looking to maintain a clean and healthy living space. Its thoughtful design and useful features position it as a reliable cleaning companion for any home.