Secondary filter
To clean secondary filter
Disconnect cleaner from electri- cal outlet.
The secondary filter protects the motor from dirt particles. If the filter becomes dirty, either clean or replace it.
To remove secondary filter, open cover of cleaner and lift filter off of motor housing. Clean filter by rinsing it in water. When dry, position filter around motor hous- ing with notched edge at the bot- tom and to the back of the motor housing.
The belt
The belt in your electronic power nozzle drives the agitator. It has been designed specifically for use in this cleaner and is important for effective operation. There are other belts manufactured that are similar in shape and size but are not designed for the HOOVER electronic power nozzle. Such belts do not operate the agitator correctly and may create stress which could damage your electronic power nozzle. Use only a genuine HOOVER Belt No.
When to replace the belt on electronic power nozzle
The belt, located under the nozzle cover, should be replaced if the “CHECK BELT” light remains “ON”. To service, remove the nozzle cover (see following section).
How to replace the belt
Disconnect cleaner from electri- cal outlet and disconnect elec- tronic power nozzle from exten- sion wands.
Turn nozzle over and unscrew the 2 Phillips head screws from the nozzle base.
15