21.Suction Regulator should be opened for easy cleaning of some types of carpet, lightweight flexible rugs and lightweight draperies,
22.Cord Clips clip nozzle cord to extension wands.
23.Nozzle Cord Connection to Handle is made by plugging nozzle cord into receptacle underneath the handle.
24.Plastic Latch Ring rotates to connect handle to extension wand or to cleaning tools.
25.Handle is on end of hose for use with extension wands or cleaning tools.
Operate cleaner only at voltage specified on data plate on bottom of cleaner.
How to assemble
1. Connect hose
To connect hose, insert hose into opening of cleaner lining up the arrow on the hose with the dot on the cleaner. Turn the hose clock- wise until the arrow lines up with the bar on the cleaner and latch locks into place.
When the hose is attached prop- erly, the hose cord plug will reach to the receptacle on the cleaner.
Insert the plug firmly and as deep into the receptacle as possible.
To disconnect hose, first remove hose cord plug from receptacle. Then, depress latch away from hose connection opening in clean- er. While holding latch, turn the hose counterclockwise until the arrow lines up with dot on the cleaner, Remove hose.
DO’T fy
LATCH&
5
