Adjust bag around the motor housing and open the folds of the bag to allow the bag to properly fill. Make sure all four folds are open.
Note: A bag that does not ex- pand properly may restrict air flow. In this event, check the bag, making sure all the folds are open. High suction on some carpet surfaces can cause the nozzle to hug the carpet and also restrict air flow. When this oc- curs, reducing the suction with the Suction Regulator or swit- ching to “LO” speed may be helpful.
Clearing obstructions
Removing larger items from car- pet and floor surfaces before vac- uuming will help prevent obstruc- tions in the hose wands or nozzle connector, and maintain the cleaning effectiveness of your cleaner.
To check for obstructions, first disconnect power nozzle cord and wands from cleaner base. Turn cleaner “ON” and check hose end for suction. Remove any obstructions. Remove power nozzle from wands and attach wands to hose. Check for suction and remove any obstructions. Before attaching power nozzle to wands, check nozzle connector.
While holding nozzle, push noz- zle connector down to lowest po- sition,
Look into nozzle connector and remove any obstructions.
14
