Turn nozzle over and unscrew the 2 Phillips head screws from the nozzle base.
The cover attaches at the front of the nozzle. Place the notched edge at the front of the cover into the groove in the nozzle base.
Return nozzle to original position and lift up back of nozzle cover. Then remove cover, rotating it forward and lifting it off.
Push bulb into socket and twist to remove. Push new bulb into socket and twist into place.
Maintaining front connection, ro- tate cover over nozzle base and pull nozzle cord through opening in cover.
Turn nozzle over and replace screws.
20