The cover attaches at the front of the nozzle. Place the notched edge at the front of the cover into the groove in the nozzle base.
While maintaining front connec- tion, rotate cover over nozzle base and pull nozzle cord through opening in cover.
Turn nozzle over and replace screws.
Agitator brushes and brush roll
When to replace brushes
Disconnect cleaner from electri- cal outlet before checking brushes.
To check condition of brushes, place edge of a card on the bot- tom of nozzle base, across agita- tor opening. Rotate agitator by hand. If brushes do not touch edge of card, all four brushes and brush roll should be replaced to maintain cleaning effectiveness.
When replacing agitator brushes and brush roll, ask for HOOVER part No. 48445017 and part No.
48418401.
17
