-
2. Attach electronic power nozzle
Note: For most convenient use with electronic power nozzle, connect curved and straight wand with cord clips to nozzle.
Attach the electronic power noz- zle at the end of the straight wand by fitting the button projection on the nozzle connector into the opening at the end of the wand. Be sure the nozzle is locked in place.
To release, press down on the center of the spring latch.
Attach the curved wand to the straight wand. Position cord into cord clips on extension wands, placing excess cord between nozzle and bottom cord clip.
To attach the hose to the exten- sion wands, rotate the plastic latch ring on the handle to accept the button projection on the curv- ed wand.
Push the handle over the wand so that the button projection fits into the slot. Turn the latch ring to lock wand in place.
Connect nozzle power cord to receptacle underneath handle.
6
