Hoover S3239 Two speed switch, Check bag indicator, Electronic power nozzle, Handle adjustment

3. Attach tool storage rack

To attach tool storage rack, in- sert rear projections of rack into the two rear slots on top of the cleaner. Snap front middle sec- tion into place.

To remove, press front middle ’ section and lift rack up.

Position tools in appropriate sec- tions on rack as indicated by symbols.

How to use

Two speed switch

Your cleaner is equipped with a switch for “Hi” and “Lo” speed.

Use “Lo” speed when reduced suction is desired such as when cleaning throw rugs or when using the tools on delicate fabrics.

Use “Hi” speed for all cleaning tasks when maximum suction is desired.

Check bag indicator

With the cleaner on “Hi” speed, the Check Bag Indicator will light up when the bag needs replaced. If powdery substances have been picked up, the bag may need replaced even if it is not full.

Note: The bag may not need replaced if the light comes on during tool

use or if there is an obstruction in the hose, wands, or power nozzle. , (See Maintenance Section.)

Electronic power nozzle

Handle adjustment

The handle has two positions when used with the electronic power nozzle: Upright and

Operating.

To lower handle to the Operating position, place your foot on the grooved area (located above the Agitator Control Pedal on the nozzle) and push the handle

down,I

7