HOW TO ASSEMBLE AND USE
Home Cleaning System Models 6877-6899 Series
Power-Touch® Handle
Remote ON/OFF Selector for bare floor or carpet
Carpet - push down on front *Off - middle
Bare Floor - push down on back
*Power ON/OFF can be controlled on some models from the
Remote Speed Control (on some | 6 |
| |
models) |
|
Regardless of the speed of the |
|
canister motor, slide to reduce or |
|
increase power as needed. |
|
Vacuum Control (on some models) Cleaning suction is reduced by pushing lever to LOW position. Place lever at High position to increase suction for carpet cleaning. Available on models without
Remote Speed
Control.1
1.Snap interlocking wands together.
2.Push assembled wands into motorized nozzle handle socket.
3.Place electric cord between cord guide; turn to position (see Detail A).
4.Press cord into channel. If the motorized nozzle cord plugs into the end of the hose, refer to steps 7, 8 & 9 (see Detail B). Continue below for the remote control handle.
5.Push motorized nozzle plug into
retainer; secure cord in slot (see | 2 | |
Detail C). | ||
|
6.Place
Continue on next page to complete assembly for both types of hose.
| Select bare floor |
12 | or carpet cleaning. |
|
For Models 6820 - 6876
steps
5 | 9 |
Open slip
8ring to reduce suction.
Detail C | 7 |
|
Detail B
7.Press cord into channels.
8.Insert handle
end of hose
4into assembled wands.
9.Plug motorized nozzle cord into hose handle.
Detail A
3
10 Handle Release
6