Power-Touch Handle Units
Fig. 3
Detail A
Nozzle
MAX MAX
Long
Lower
Wand
Power Cord
Powerhead
Unit
Standard
Handle
Units | Power Cord |
| |
| Short Wand |
Fig. 3
Nozzle
MAX | MAX |
Powerhead
Unit
Continued
Fig. 3 Push the nozzle at the bottom of the cyclone unit into the top of the long lower wand. Adjust the position of the cyclone unit. Push the long lower wand into the powerhead unit. Plug the power cord into the power cord retainer at the top of the cyclonic housing, see Detail A. Attach the Power- Touch handle following instructions in the owner’s guide.
Important Safety Information
-Do not vacuum surfaces which have been subjected to inflammable solvents.
-Do not pick up any liquid.
-Do not pick up hot ashes which could cause a fire.
Emptying
Empty the dust compartment of the cassette after each use or when the dust cup is filled up to the MAX level, Fig. 3. Detach the dust cup by following the instructions in Fig. 2b in reverse.
Empty the contents into a waste container. To reattach the dust cup again follow the described steps in Fig. 2b.
Maintenance
The Cyclonic Bag Saver can be washed in cold or warm water and a mild detergent. Thoroughly dry the dust compartment with a soft towel before using it again. If the cyclone unit clogs, use the vacuum cleaner to unclog it.
10