![](/images/new-backgrounds/1013955/1395519x1.webp)
The instructions in this booklet serve as a guide to routine maintenance. To avoid unnecessary service calls, check the dust cup, filters, belt, and brush roll often. We suggest emptying the dust cup after every use.
UTINERO MAINTENANCE
CupDust
NOTE: | When vacuuming carpet fresheners or cleaners, powder, plaster dust, or similar fine substances, |
| the dust cup and filters will require more frequent maintenance. |
NOTE: | Turn off the switch and unplug the electrical cord before changing the filter. Never operate the |
| vacuum cleaner without the dust cup or filter assembly in place. |
Emptying the Dust Cup:
1 Remove dust cup by pulling latch upward and | 2 Grasp dust cup lid and twist counterclock- |
pivoting dust cup out and away from cleaner. | wise to remove. |
3Lift filter up and out of dust cup with a twisting motion.
4Dump debris in a waste container.
Reinstalling the Dust Cup:
1Replace filter onto center tube in dust cup applying gentle pressure.
Line up tabs on dust cup with openings on lid, rotate | Tab | |
2 lid clockwise while applying pressure to secure. The | ||
| ||
lock symbol ( ) on lid will be centered over dust cup | Tab | |
handle when properly assembled. | ||
|
3To replace dust cup, position dust cup with handle facing inside the dust cup compartment; place bottom of dust cup in bottom of compartment and rotate upward, pushing dust cup against cleaner until it locks into place.
2 |
10